KEIL软件STM32F4芯片最新安装包，开发STM32F4必备

STM32F4固件包2.11.0版本，Keil.STM32F4xx_DFP.2.11.0.pack,直接下载即可

keil5的字体配色方案，依据别人的仿vs配置文件，填入自己的个性化配置，大体跟vs更加接近。看代码比默认的清晰，也不存在过分高亮

STM32 KEIL 编写的可移植 Modbus RTU 协议主站和从站程序源码 亲测可用 课根据需要移植 希望帮到需要的人 我也是通过网络学习 现在回馈网络

自己写的HC-SR04超声波测距模块的代码，使用的主控是STM32F103，在keil里面写的l

Example description =================== This Demo provides a description of how to use the USB-FS-Device on the STM32F10xxx, STM32F37xxx, STM32F30xxx and STM32L15xxx devices. The STM32 device is enumerated as HID compliant device, that uses the native PC Host USB-FS-Device HID driver. To test the example, you need to: 1)- Start the "USB HID Demonstrator" PC applet and connect STM32 USB to PC 2)- The device should be detected and shown in the USB HID target box 3)- Press Graphic View button 4)- You can Select "use SET_FEATURE" or "use SET_REPORT" in order to use SET_REPORT request to send HID Report for LED control 5)- Make sure that following report ID are configured: LED1 ID (0x1) , LED2 ID(0x2), LED3 ID(0x3), LED4 ID(0x4), and BUTTON1_ID(0x5) 6)- Select Leds to switch on/off on the EVAL board => a SET_REPORT request will be sent More details about this Demo implementation is given in the User manual "UM0424 STM32F10xxx USB development kit", available for download from the ST microcontrollers website: www.st.com/stm32

rikirobot_stm32-keil.zip

开发环境：Keil 4.72 仿真器：ULINK STM32F103T8 (直接用在STM32F103VE也可以) stm32 在RAM中调试，已测试通过,可支持中断，程序用了串口和LED灯指示

keil下的lwip+ucosIII+stm32下的完整项目代码，实现了LWIP下的API接口函数编程。

stm32 keil用jlink4.40驱动,通过JLINK仿真器连接STM32和电脑，点击download按钮就能通过JLINK将编译好的程序下载到STM32中。