利用LSM6DSL传感器检测倾角，达到一定阀值以后由INT引脚输出高电平，唤醒单片机，单片机通过BC26 NB模块发送数据到云平台
2019-12-21 21:39:17
11.05MB
1
matlab开发-MPU6050加速度陀螺仪。Mise en Oeuvre de l'Acc_l_rome_tre陀螺仪编号_rique MPU 6050 Sur Arduino Mega
2019-12-21 21:38:54
1.86MB
1
三轴陀螺仪MPU6050基于STM32F103的IIC驱动代码，在KEIL UV5上开发，只要配置OK，即可直接运行，所用到的函数可用于其他单片机。
2019-12-21 21:33:38
311KB
1
SPI读取MPU9250 9轴加速度，陀螺仪，磁力计，对于MPU9250而言，除了加速度、陀螺仪外，新增了磁力计模块，但是磁力计模块只支持I2C的读写，
为了能够利用起SPI的优势。作者花了一些功夫，仔细研读了MPU9250 datasheet 整理出SPI读取MPU9250全套工程源码
2019-12-21 21:31:11
9.74MB
1
采用ADIS16405集成IMU组件实现惯性导航，该IMU组件包含了磁传感器，示例程序给出了数据采集代码。集成电路介绍：The ADIS16405 iSensor® product is a complete inertial system
that includes a triaxal gyroscope, a triaxial accelerometer, and a
triaxial magnetometer. The ADIS16405 combines the Analog
Devices, Inc., proprietary iMEMS® technology with signal
conditioning that optimizes dynamic performance. The factory
calibration characterizes each sensor for sensitivity, bias, alignment,
and linear acceleration (gyroscope bias). As a result, each sensor
has its own dynamic compensation for correction formulas that
provide accurate sensor measurements over a temperature range of
−40°C to +85°C. The magnetometers employ a self correction
function to provide accurate bias performance over temperature
as well.
2019-12-21 21:16:31
781KB
1