按键实现中断显示字符，用超级终端输出字符。这是华清创客学院的嵌入式培训的作业，leve9D6,arm基础中断学习

PCIe 设备虚拟化QEMU中的实现 包括处理中断的硬件以及Linux如何响应和处理终端。技术分析分享

#已经编译过的内核源码路径 KERNEL_DIR = /home/kernel export ARCH=arm export CROSS_COMPILE=arm-linux-gnueabihf- #当前路径 CURRENT_DIR = $(shell pwd) MODULE = interrupt

Lab 3 – GPIO, SysTick and Interrupt C Programming for a real time operating system RTOS) scheduler using Keil simulator For this lab exercise you will Keil simulator (based on Nucleo-F103RB board). The objective is to understand how the SysTick as the Hardware Timer can be used to provide a periodic interrupt for a Real Time Operating System (RTOS). For simplicity purposes, the GPIO pins will be used in this exercise that represent the scheduled tasks within the RTOS. The aim is to learn

Linux操作系统课程指导：Ch7 Interrupts and Interrupt Handlers.ppt

MultiProcessor Interrupt Controller (MPIC) Core

基于S32KDS平台SDK3.0编写的flexcan组件interrupt例程

介绍了Linux中和中断相关的软硬件知识

详解DMA （Direct memory access ）原理， DMA， pooling, interrupt原理； xilinx axi-dma原理，axi4 interconnet bus, xilinx axi-dma原理 ; DMA实现fpga外设与ARM ddr3sdram 交互数据的原理流程、注意。 Cypress CX3 DMA原理，GPIF-II 转态机接口原理图。

基于MPC5748G的can例程，包含轮询和中断两种模式，官方例程比较少，有需要的可以下载 。