BC35 BC95 STM32 继电器测试板，NBiot NB-iot 测试板，使用移远的模组加上STM32F103C8T6，内含PCB和原理图，可以直接用Altium打开。

manual operating chinese

自己画的（BC35+BC26）PCB封装，在项目中都已经实际使用了，板子也出了好几套了，没有一点问题，AD任一个版本都能打开。

BC35中文AT指令MQTT指令COAP指令

该文档为移远的BC35-G模块的硬件设计手册，在此提供广大同行下载学习，来源为移远官网

Quectel_BC35-G&BC28&BC95 R2.0_AT命令手册_V1.0（中文版） 详细信息请访问移远官网https://www.quectel.com/cn/product/bc28.htm

移远模块下载工具：QFlash_V5.0 和 QFlash 用户指导说明书。该工具无需安装便可直接在装 有如下系统的 PC 上运行： ⚫ Windows 7 ⚫ Windows 8 ⚫ Windows 10

AT Command Syntax Table 2: AT Command Syntax Multiple commands can be placed on a single line using a semi-colon (“;”) between commands. Only the first command should have AT prefix. Commands can be in upper or lower case. When entering AT commands spaces are ignored except in the following cases: ⚫ Within quoted strings, where they are preserved; ⚫ Within an unquoted string or numeric parameter; ⚫ Within an IP address; ⚫ Within the AT command name up to and including a ‘=’, ‘?’ or ‘=?’. They can be used to make the input more human-readable. On input, at least a carriage return is required. A newline character is ignored so it is permissible to use carriage return/line feed pairs on the input. Test Command AT+=? Check possible sub-parameter values Read Command AT+? Check current sub-parameter values Write Command AT+=p1[,p2[,p3[.....]]] Write command Execution Command AT+

2022-01-19 11:03:54 968KB AT_Commands_

1