Version: 1.2.0 (2016-09-21) Keil.STM32L1xx_DFP.1.2.0.pack Updated STM32L1xx device support files. Added STM32L162xE device support. Added STM32L100xxA device support. Added STM32L151xxX device support. Added STM32L152xxX device support. Added STM32L162xxX device support. Added STM32L162xxA device support. Updated documentation. Reworked component startup. Reworked examples. Version: 1.1.0 (2016-08-01) Fixed SVD files access attribute for DIER registers to read-write. Added 'boards' section. Reworked 'conditions', 'Startup' sections.

Version: 1.3.0 (2020-09-07) Keil.STM32L1xx_DFP.1.3.0.pack This DFP works either with STM32CubeMX (STM32CubeMX V6.0.0 and STM32Cube_FW_L1 V1.10.0 or higher) or Standalone (no support for STM32CubeMX). This pack contains only a subset of the files from STM32Cube_FW_L1 version 1.10.0 (ST Drivers, STM32Cube documentation and fonts). Device support: Added device variants to match STM32CubeMX notation. Added DebugDescription. Added debug configuration files: DBGMCU INI and DBGCONF. Added capability to launch the Option Byte Loading after a Flash Download. Updated SVD files. Updated documentation. CMSIS-Driver: Added VIO module for boards STM32L-Discovery, STM32L100C-Discovery. Board support: Reworked examples. Updated LED_STM32L-Discovery.c: LED_On and LED_Off return -1 if parameter num is out of range.

Version: 2.5.0 (2020-10-21) Keil.STM32L4xx_DFP.2.5.0.pack Updated Pack to STM32Cube_FW_L4 Firmware Package version V1.16.0 using HAL Drivers V1.12.0 Package Description (pdsc): Added global define USE_HAL_DRIVER to the component ::Device:STM32Cube HAL:Common. Device support: Aligned devices with CubeMX DB. CMSIS Flash Algorithm: Removed targets (STM32L4xx_512, STM32L4xx_256) from STM32L4Rx Flash Algorithm project. Added source code for: STM32L476G-Disco QSPI, STM32L4P5G-DK OSPI, STM32L4P5G-DK PSRAM STM32L4R9I-DK PSRAM, STM32L4R9I-DK OSPI1 and STM32L4R9I-EVAL OSPI. Added PSRAM external Loader support for STM32L4R9I-Disco. Fixed STM32L4P5 1M internal flash Loader sector erase with DBANK mode. Fixed STM32L4xx 512K and 128K internal flash Loader sector erase. CMSIS-Driver: MCI: Replaced empty delay loops with _NOP(). Added handling for separate SD and MMC HAL layers. Added busy signal handling after CMDREND interrupt. SPI: Corrected PowerControl function (to return error if Initialize was not called, to abort active transfer if power off was requested). Updated GetDataCount function to give accurate count. Corrected Uninitialize function (to power off the peripheral if it is powered). USART: Added Driver_USART6 (uses LPUART1). Corrected GetTxCount/GetRxCount implementation. USBD: Removed include of stm32l4xx_hal_pcd.h header. Corrected documentation of STM32CubeMx configuration. Updated Boards Examples: Migrated CubeMX projects to V6.0.1. Changed variant selection to "MDK-Plus" where possible. Updated all USB Host/Device examples with user templates from MDK-Middleware v7.11.1.

Version: 1.3.0 (2020-11-19) Keil.STM32L5xx_DFP.1.3.0.pack Updated Pack to STM32CubeL5 Firmware Package version V1.3.1 (using HAL Drivers V1.0.3.) Added global define USE_HAL_DRIVER to the component ::Device:STM32Cube HAL:Common Added global define USE_FULL_LL_DRIVER to the component ::Device:STM32Cube LL:Common CMSIS-Driver: SPI: Corrected peripheral resource for CubeMX configuration. STM32CubeL5 HAL: Added Public key accelerator (PKA) HAL component. Package Description (pdsc): Removed stm32l5xx_hal_conf.h from "STM32Cube HAL / Common" component. stm32l5xx_hal_conf.h is generated by STM32CubeMx. Adding condition to api and taxonomy to limit to the devices described in this pack. Flash programming algorithms: Added octo SPI algorithm for STM32L562E-DK board. Added octo SPI algorithm for STM32L552E-EVAL board. Restored original ST octo SPI algorithm.

Version: 2.15.0 (2020-09-28) Keil.STM32F4xx_DFP.2.15.0.pack Download Updated Pack to STM32Cube_FW_F4 Firmware Package version V1.25.1 using HAL Drivers V1.7.9. STM32CubeMX integration (Version 6.0.1): Added support for Timebase Source TIMx (FrameworkCubeMX_gpdsc.ftl). Removed non-existent include path. CMSIS Flash Algorithm: Corrected STM32F42xxx_43xxx_OPT Algorithm. CMSIS SVD: Updated STM32F42*.svd, STM32F43*.svd files. CMSIS-Driver: I2C: Corrected 2 byte reception in master mode. MCI: Replaced empty delay loops with _NOP(). SPI: Corrected PowerControl function (to return error if Initialize was not called, to abort active transfer if power off was requested). Updated GetDataCount function to give accurate count in DMA mode. Corrected Control function (abort in DMA mode, software controlled slave select in slave mode, TI Frame Format selection, ignore bus speed for slave mode). Corrected Uninitialize function (to power off the peripheral if it is powered). Corrected SPI3_SCK pin configuration. Corrected DMA MemDataAlignment configuration. USART: Corrected DMA MemDataAlignment configuration. USBD_HS/USBH_HS: OTG_HS ULPI clock disabled in low power if internal PHY is used to enable proper operation of OTG_HS port in FS mode during CPU sleep. CAN/EMAC/USBD/USBH: Removed macros already provided by cmsis_compiler.h. Updated Boards Examples: Migrated CubeMX projects to V6.0.1 and updated config files. Changed variant selection to "MDK-Plus" where possible. Updated all USB Host/Device examples with user templates from MDK-Middleware v7.11.1. Terminating app_main thread with osThreadExit() to avoid endless loop Updated MS Windows UBS driver files.

Version: 2.12.0 (2019-07-17) Keil.STM32F7xx_DFP.2.12.0.pack Download Updated Pack to include subset of STM32Cube_FW_F7 Firmware Package version V1.15.0 using HAL Drivers V1.2.7 Added support for Low Level (LL) drivers. Corrected RTE_Device.h file (I2C3_SDA) Corrected condition for selecting HAL RCC MX_Device_h.ftl: Updated parsing of USART virtual mode Updated generation of macros: Added handling for '(' and ')' symbols Corrected launching STM32CubeMX via "play" button for existing projects overwrites with a new STM32CubeMX project file instead of loading existing. Updated Board Examples: graphics examples use Segger emWin version 5.50.0. examples enable Event Recorder in debug targets Updated LCDConf.c (ready for GUI_USE_ARGD = 1) CMSIS-Driver: CAN: Corrected SetBitrate function to leave Silent and Loopback mode as they were. Corrected SetMode function to clear Silent and Loopback mode when NORMAL mode is activated. Corrected MessageSend function to only access required data for sending. EMAC: Corrected __MEMORY_AT(x) define to be compliant with Arm Compiler 6. Corrected: ETH DMA initialization moved to enable of MAC transmitter or receiver solving netInitialize/netUnnitialize/netInitialize sequence. I2C: Corrected transfers for data sizes greater than 255 (Complete Reload handling). Corrected I2C_SlaveReceive functionality. Corrected code alignment. MCI: Added data cache handling. USART: Added check for valid pointer to USART_PIN prior to use. Corrected POWER_OFF sequence. DMA is DeInitialized after it is aborted. USB Device: Updated USBD_EndpointConfigure function to check that maximum packet size requested fits into configured FIFO (compile time configured). I/O output speed is configurable SPI: Updated SPI_TRANSFER_INFO structure - tx_buf type changed from uint8_t * to const uint8_t *. Added check for valid pointer to SPI_PIN prior to use.

Version: 2.14.0 (2020-12-18) Keil.STM32F7xx_DFP.2.14.0.pack STM32CubeMX integration: Added support for USB PHY configuration (MX_Device_h.ftl and FrameworkCubeMX_gpdsc.ftl). Added debugProbe board description. Description file (pdsc): Added global define USE_HAL_DRIVER to the component ::Device:STM32Cube HAL:Common. Added global define USE_FULL_LL_DRIVER to the component ::Device:STM32Cube LL:Common. CMSIS-Driver: EMAC/I2C/MCI/SAI/SPI/USART: Corrected Data Cache handling. MCI: Replaced empty delay loops with _NOP(). USART: Corrected baud rate configuration. USBD_HS/USBH_HS: OTG_HS ULPI clock disabled in low power if internal PHY is used to enable proper operation of OTG_HS port in FS mode during CPU sleep. VIO: LCD support can be disabled with VIO_LCD_DISABLE define. Board Examples: Updated CubeMX examples: Migrated CubeMX projects to V6.0.1. Updated Platform example: Reduced Idle and Timer thread stack size. Reworked README.md format.

Version: 1.2.0 (2019-07-19) Keil.STM32G0xx_DFP.1.2.0.pack Updated STM32Cube Firmware G0 library to version V1.3.0. Added CubeMX support. Added device support for: STM32G030, STM32G031, STM32G041 devices. Updated device documentation. Updated SVD files for each STM32G0xx subfamily.

Version: 1.3.0 (2021-02-17) Keil.STM32G0xx_DFP.1.3.0.pack Updated STM32Cube Firmware G0 library to version V1.4.0. Added device support for: STM32G050, STM32G051, STM32G061 devices. STM32G0B0, STM32G0B1, STM32G0C1 devices. Updated device documentation. Updated SVD files. Added flash programming algorithms.

Version: 1.1.0 (2019-05-28) Keil.STM32G4xx_DFP.1.1.0.pack Initial public release of STM32G4 Series Device Support: Requires STM32CubeMX Version 5.2 or higher and STM32CubeG4 Firmware Package V1.0.0 Added debug sequences: configure ETM Trace. Added board support for STM32G474E-EVAL: Added Blinky example.