这个传感器让我了解了很多，以前使用的单片机，基本没有遇见过堆栈溢出的问题，这个传感器让我遇到了，在此记录调试心得。 首先把所有驱动文件都贴出来了 心率血氧算法代码 algorithm.h /** \file algorithm.h ****************************************************** * * Project: MAXREFDES117# * Filename: algorithm.h * Description: This module is the heart rate/SpO2 calculation algorithm heade

行业资料-交通装置-一种汽车氧传感器内阻的测试电路及测量方法.zip

氧传感器安装在排气管，它在发动机热机后排气温度在400℃以上时才开始监测排气中氧含量，并把氧含量转变成电信号输入ECM，当混合气浓度高于14.7∶1值时，氧传感器输出1V信号电压；当混合气较稀时，输出0V信号电压。氧传感器端子图和电路图如图1所示。2.0L、2.4L发动机采用加热型氧化锆氧传感器。 　　图1 L4发动机氧传感器端子及电路图 　　L4发动机氧传感器检测数据如表1所示。 　　表1 L4发动机氧传感器检测数据 　　2.7L V6发动机采用氧化钛式氧传感器，该传感器与EOM连接电路如图2所示，其检测数据如表2所示。 　　图2 2.7L V6发动机氧传感器与EOM连

行业资料-电子功用-一种氧传感器的温度补偿电路

行业-电子政务-一种氧传感器电极、具有该电极的浓差型氧传感器及其制备方法.zip

大陆电子的NOX传感器详细资料，12V以及24V资料除了电源电压不同以外，其他规格参数完全一致，CAN报文资料详细

行业分类-物理装置-基于机器学习的光学溶解氧传感器的标定方法.zip

博世LSU4.9氧传感器英文详细说明书， The wide band lambda sensor LSU is a planar ZrO2 dual cell limiting current sensor with an integrated heater. It is used to measure the oxygen content and the λ-value of exhaust gases in automotive engines (gasoline and diesel). Its monotonic output signal in the range of λ=0.65 to air makes the LSU capable of being used as an universal sensor for λ=1 measurement as well as for other λ ranges. The connector module contains a trimming resistor, which defines the characteristics of the sensor and is necessary for the sensor function. The wide band sensor LSU operates only in combination with a special LSU control unit (e.g. AWS control box, LA4 or CJ125 IC).

LSU4.9-BOSCH氧传感器The wide band lambda sensor LSU is a planar ZrO2 dual cell limiting current sensor with an integrated heater. It is used to measure the oxygen content and the λ-value of exhaust gases in automotive engines (gasoline and diesel). Its monotonic output signal in the range of λ=0.65 to air makes the LSU capable of being used as an universal sensor for λ=1 measurement as well as for other λ ranges.

氧是维系人类生命的基础，心脏的收缩和舒张使得人体的血液脉动地流过肺部，一定量的还原血红蛋白(HbR)与肺部中摄取的氧气结合成氧和血红蛋白(HbO2)，另有约2％的氧溶解在血浆里。这些血液通过动脉一直输送到毛细血管，然后在毛细血管中将氧释放，以维持组织细胞的新陈代谢。