基于树莓派的28BYJ-48步进电机的驱动代码。实现旋转一圈，可自行增加功能，实现对其控制旋转角度，循环，正反转等控制。有需要的朋友可以下载，有任何问题也可以联系我，一起交流。利用树莓派引脚控制步进电机。
2021-04-12 11:19:58
2KB
1
树莓派LCD驱动/2.8/3.2/3.5/3.97/4.3/5/7等！
You can focus on the following GitHub web site, for the latest lcd drivers:
https://github.com/goodtft/LCD-show
===============================================================================================================
"LCD-show-170315.tar.gz" just for Raspbian (Release date:2017-03-02) or later,
DO NOT use it for the Raspbian version before 2017-03-02.
================================================================================================================
"LCD-show-160701.tar.gz" support Raspbian version before Raspbian-2017-02-16,such as(2017-02-16,2017-01-11,
2016-11-25,2016-09-23,2016-05-27,2016-05-10,2016-03-18,or earlier).
And This Driver also tesed on "kali-2.1.2" ,"ubuntu-mate-16.04-beta2"
================================================================================================================
How to Install:
1.)Step1, Install Raspbian official mirror
a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card
2.) Step2, Clone my repo onto your pi
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
3.)Step3, According to your LCD's type, excute:
In case of 2.8" LCD
sudo ./LCD28-show
In case of 3.2" LCD
sudo ./LCD32-show
In case of 3.5" LCD
sudo ./LCD35-show
In case of 3.97" LCD
sudo ./LCD397-show
In case of 4.3" LCD
sudo ./LCD43-show
In case of 5" LCD
sudo ./LCD5-show
In case of 7inch(B)-800X480 RPI LCD
sudo ./LCD7B-show
In case of 7inch(C)-1024X600 RPI LCD
sudo ./LCD7C-show
If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi
Wait a few minutes,the system will restart automaticall , enjoy with your LCD.
2019-12-21 21:19:04
163KB
1