IRIG_B.zip

内含IEEE1344-1995（R2001）PDF文档 、 基于FPGA的IRIG_B解码电路设计与实现PDF文档、VERLOG解码代码实现

IEEE Standard for Synchrophasors for
Power Systems
1. Overview
1.1 Scope
This is a standard for synchronized phasor measurement systems in substations. It addresses synchronization of data
sampling, data-to-phasor conversions, and formats for timing input and phasor data output from a Phasor
Measurement Unit (PMU). It does not specify response time, accuracy, hardware, software, or a process for computing
phasors.
1.2 Purpose
This standard defines synchronized phasor measurements in substations so that the measurement equipment can be
readily interfaced with associated systems. It specifies data formats and synchronization requirements to allow
correlating phasors from various sources and comparing them with similar data from different measurement systems.
1.3 Need for this standard
Recent developments in the field of power system data acquisition provide users with the ability to record, time-tag,
transmit, and analyze power system phasor quantities in real time. Given the emphasis on future system development,
many different hardware and software approaches are being implemented to make the phasor data available. A
standard is needed for integrating measurement systems into substation environments, to specify data output formats,
and to assure that the measurement processes are producing comparable results. The synchrophasor standard will help
ensure maximum benefits from the phasor measurements and will allow interchange of data between a wide variety of
users of both real time and off-line phasor measurements.
2. References
This standard shall be used in conjunction with the following publications: