WinPLC-Analyzer

西门子plc调试软件，功能强大。具体https://www.mhj-tools.com/winplc-analyzer/ 直接看网页。 先安装软件，然后用文件夹中的破解覆盖。本人亲自破解，只此一家。分数高了点。 With WinPLC-Analyzer you can record signals of a S7-PLC (S7-300, S7-400, S7-1200) or S5-PLC (Simatic S5 series). You can record signals like input, output, flags, data, timer and counter. If you want, you can define a Trigger with S7-STL code. Then you can use this trigger to control the recording or to create a user message. When using S7-300, S7-400 you can also record cyclic exact. This means, that a short program will be transfered into the PLC. This ensures that you see every single edge in the recording. Without modifying the PLC progam you can record "scan exact". That means you can define the sampling rate in ms. With the special recording type "Offline recording", you can record the data within the PLC (without the PC connected). The next day you can transfer the results to your WinPLC-Analyzer project. Additional to the normal trend data, you can define "Snapshots". A "Snapshot" is a range of additional data, that will be stored, if a trigger event is raised. WinPLC-Analyzer also stores the data of the "i-stack" in case of a unexpected "PLC-Stop". Then you can examine the reasons for the PLC-Stop even after days. All software driver are included in the licence of WinPLC-Analyzer. You don't have to pay for every single driver separatly. To access a PLC over TCP/IP you don't need any other software or driver. Only if you want to use a SIEMENS Interface, the driver of it must be installed on the PC.