AD9361寄存器自动配置工具软件, 能自动生成寄存器配置，非常好用亲测好用，挺不错的资源，大家快来下载吧！挺有用的！需要的话可以来下载哦！

STM32F4开发指南-寄存器版本_V1.1,有详细的软硬件介绍，仅供参考，标准库函数版本见另外一个资源。

采用三菱圆口的Rs422进行通讯，笔记本需要有Usb转RS422的线，不然下载后不能使用，还有三菱的协议在发送后得延时才有数据返回，所以此程序扫描效率比较低，只适合拿来学习！！！

用vhdl设计的一种延时程序，运用了移位寄存器原理，新人设计的适合新人看看

通过简单的选取stm8寄存器的选项就能生产设置代码非常时候初学者使用生成代码是iar的；这个版本带分压电阻计算机太方便了呵呵

本实验代码是基于寄存器编写的，通过IO口模拟输出，利用定时器设置波特率，从而实现通信，可以理解成真正的串口。通俗易懂，深入浅出，适合刚上手STM8开发板的小伙伴，此外，改模板还可移植到实际工程中。

这是一个基于STM32F１的备份寄存器BKP储存实验，已测试成功 使用的是HAL库

RTL8305的寄存器读写以及stc的串口设置

MPU-6050 寄存器（中文版），介绍相关寄存器

RTL8306E软件开发寄存器操作编程指南 RTL8306E/8306M/8304E PROGRAMMING GUIDE The RTL8306E release package contains ASIC drivers, which provides general APIs that based on user configuration to configure relative ASIC registers. Inside of the ASIC driver, it uses GPIO to emulate MDC/MDIO signal to communicate with RTL8306E. This part needs to be porting to the target platform. The RTL8306E release package can also be applied to other chips, such as RTL8304E/RTL8306M. These ASICs may have different port numbers. For example RTL8304E only have 4 ports, but RTL8306E have 6 ports. The port number descriptions for different ASICs can be found in chapter 7. This SDK API programming guide file uses RTL8306E as an example to descript the usage of API functions. But for different ASICs, the port parameter which is needed by some API fu nction is different from RTL8306E , due to the AISCs’ different port numbers. So in order to us e ASIC driver code, it’s recommended for you to make clear of the ASIC’s port number at first. And then make some configuration code modification based on the descriptions of sector 3.3 an d chapter 7