作为在 ARM Cortex-M 处理器上优化代码生成的 MATLAB-to-C 工作流程示例，白皮书说明了如何将生成的 C 代码从 MATLAB (R2014b) 移植到 KEIL μVision IDE (v5.12)。

本参考手册针对应用开发，提供关于如何使用STM32F101xx 和 STM32F103xx 微控制器的存储器和外设的详细信息。

ARM Cortex-M0 Technical Reference Manual

Cortex-M3 技术参考手册(中文) Cortex-M3 技术参考手册(中文)

关于Cortex-A9芯片的解读借鉴.pdf

《ARM Cortex-M0XX指南》是全球首本系统论述ARM Cortex-M0处理器及其编程的图书。本书既有ARM Cortex-M0处理器内核、体系结构及其应用的详尽论述，也有指令集、编译器、软件开发的基本论述，甚至也涵盖如何定位程序代码中的错误和软件移植等方面的知识。本书适合的读者对象包括：嵌入式产品设计工程师、嵌入式软件开发人员、电子爱好者以及学习嵌入式系统课程（ARM Cortex-M0）的高年级本科生及研究生等。

很好的资源，可以很全面的介绍M0 内核以及奇台相关知识受益匪浅，希望可以帮助大家

本书以Xilinx公司的XC7Z020 Zynq-7000 Soc器件和Vivado 2015.4集成开发环境为平台，全面系统介绍了嵌入式系统设计的完整设计流程，作者以本书为核心，构建了公开教学视频，设计案例，教学课件，QQ交流群等学习资源，以方便广大读者与作者交流互动。

This book is for both hardware and software engineers who are interested in the ARM Cortex™-M3 processor. The Cortex-M3 Technical Reference Manual (TRM) and the ARMv7-M Architecture Application Level Reference Manual already provide lots of information on this processor, but they are very detailed and can be challenging for novice readers. This book is intended to be a lighter read for programmers, embedded product designers, systemon- chip (SoC) engineers, electronics enthusiasts, academic researchers, and others who are investigating the Cortex-M3 processor, with some experience of microcontrollers or microprocessors. The text includes an introduction to the architecture, an instruction set summary, examples of some instructions, information on hardware features, and an overview of the processor’s advanced debug system. It also provides application examples, including basic steps in software development for the Cortex-M3 processor using ARM tools as well as the Gnu’s Not Unix tool chain. This book is also suitable for engineers who are migrating their software from ARM7TDMI to the Cortex-M3 processor because it covers the differences between the two processors, and the porting of application software from the ARM7TDMI to the Cortex-M3.

嵌入式系统原理与实践:ARMCortex-M4Kinetis微控制器