支持半高、全高的MSATA转SATA接口

BusHound_v6.0.1正式版(串_并_IDE_SATA_USB抓包).rar

很多主板上的M.2接口都是SATA与NVME复用， 即插入NVME硬盘或无线网卡，走pcie信号，插入NGFF的硬盘走SATA信号。 这张对比表则是2个不同信号总线的针脚定义，供开发或主板维修使用。

The SATA (Serial ATA) interface is intended to expand and eventually replace the parallel ATA interface that has been the standard connection for hard drives and CD-ROM/DVD drives in Personal Computers for nearly twenty years. SATA, a high-speed serial version of ATA, is designed to maintain compatibility with software written for the standard ATA implementation, thus easing the transition to SATA. New advances in SATA provide new capabilities such as Native Command Queuing that improve overall drive performance and greater reliability. In addition, the latest version of SATA (called SATA II) adds new features such as higher transfer rates, Port Selectors, Port Multipliers, and enclosure services, making it easier to implement low cost, high capacity, storage subsystems for server implementations. This book provides essential information for Systems Engineers, System Validation Engineers, Hardware Designers, and Software Developers. o Serial ATA Storage Technology provides ATA background information necessary to understand the Serial ATA implementation. This book provides detailed information regarding the serial protocol, commands, and electrical interface. A tutorial approach is taken to facilitate thorough understanding, using numerous illustrations, tables and examples. The text is also designed to provide easy to access valuable reference information

USB转SATA芯片采用JM20329 有需要的同志多多下载

一个完整的SATA转USB/1394方案,其中有带参数原理图,和成品电路板PCB(cadence)文件, 直接可以用来生产. 附件一篇文章: SATA+PCB設計挑戰和建議.doc JM20329_StandardSCH_LQFP64_1V0.pdf JM20329_STANDARDSCH_LQFP64_1V0.DSN

完整版芯片数据手册，可用于对usb和sata的接口转接

本文件是一个SATA转USB方案，原理图所用软件是Cadence，请使用10.1以上版本打开，资源来自网络，请仅做参考。

这是Serial ATA international organization出的sata 2.6的协议手册，涵盖了sata相关的基础内容以及相关命令，对于学习SATA协议的小伙伴都非常推荐。

SATA硬盘仿真模型。The xilinx GTP is configured as SATA PHY,and 256MB DDR2 memory(Xilinx XAPP859) is HDD storge space. It has been tested ok with SATA Host.Please follows the steps. 1>The following path is necessary. setenv LMC_HOME /export/home/mulary/model setenv LMC_CONFIG $LMC_HOME/data/linux.lmc set path =($path $LMC_HOME/bin) setenv LD_LIBRARY_PATH $LMC_HOME/lib/linux.lib:$LD_LIBRARY_PATH