FDC2214在stm32上的驱动

上传者: 36558519 | 上传时间: 2022-02-25 14:08:21 | 文件大小: 8.88MB | 文件类型: -
#define _FDC2X14_C #include "sys.h" #include "FDC2X14.h" #include "myiic.h" #include "delay.h" #include "usart.h" #define FDC2X14_Address 0x2A #define FDC2X14_W FDC2X14_Address<<1 #define FDC2X14_R (FDC2X14_Address<<1)+1 #define DATA_CH0 0x00 #define DATA_LSB_CH0 0x01 #define DATA_CH1 0x02 #define DATA_LSB_CH1 0x03 #define DATA_CH2 0x04 #define DATA_LSB_CH2 0x05 #define DATA_CH3 0x06 #define DATA_LSB_CH3 0x07 #define RCOUNT_CH0 0x08 #define RCOUNT_CH1 0x09 #define RCOUNT_CH2 0x0A #define RCOUNT_CH3 0x0B #define OFFSET_CH0 0x0C #define OFFSET_CH1 0x0D #define OFFSET_CH2 0x0E #define OFFSET_CH3 0x0F #define SETTLECOUNT_CH0 0x10 #define SETTLECOUNT_CH1 0x11 #define SETTLECOUNT_CH2 0x12 #define SETTLECOUNT_CH3 0x13 #define CLOCK_DIVIDERS_C_CH0 0x14 #define CLOCK_DIVIDERS_C_CH1 0x15 #define CLOCK_DIVIDERS_C_CH2 0x16 #define CLOCK_DIVIDERS_C_CH3 0x17 #define STATUS 0x18 #define ERROR_CONFIG 0x19 #define CONFIG 0x1A #define MUX_CONFIG 0x1B #define RESET_DEV 0x1C #define DRIVE_CURRENT_CH0 0x1E #define DRIVE_CURRENT_CH1 0x1F #define DRIVE_CURRENT_CH2 0x20 #define DRIVE_CURRENT_CH3 0x21 #define MANUFACTURER_ID 0x7E #define DEVICE_ID 0x7F u32 Init_FDC[4]; u32 Data_FDC[4]; ///FDC2X14 IO��ʼ�� void FDC2X14_Init(void) { GPIO_InitTypeDef GPIO_InitStructure; RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOB, ENABLE ); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP ; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO;_InitStructure); GPIO_ResetBits(GPIOB,GPIO_Pin_9); // ������ IIC_Init();//��ʼ��iic //����SetFDC2X14�Ĵ��� SetFDC2X14(RCOUNT_CH0,0x30,0xCB); SetFDC2X14(RCOUNT_CH1,0x30,0xCB); SetFDC2X14(RCOUNT_CH2,0x30,0xCB); SetFDC2X14(RCOUNT_CH3,0x30,0xCB); SetFDC2X14(CLOCK_DIVIDERS_C_CH0,0xff,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH1,0x20,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH0,0x20,0x01); SetFDC2X14(CLOCK_DIVIDERS_C_CH1,0x20,0x01); SetFDC2X14(SETTLECOUNT_CH0,0xff,0xff); SetFDC2X14(SETTLECOUNT_CH1,0x00,0x19); SetFDC2X14(SETTLECOUNT_CH2,0x00,0x19); SetFDC2X14(SETTLECOUNT_CH3,0x00,0x19); SetFDC2X14(ERROR_CONFIG,0x00,0x00); SetFDC2X14(MUX_CONFIG,0x82,0x0c); SetFDC2X14(DRIVE_CURRENT_CH0,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH1,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH2,0x50,0x00); SetFDC2X14(DRIVE_CURRENT_CH3,0x50,0x00); SetFDC2X14(CONFIG,0x14,0x01);//ʹ���ⲿʱ�� 0x17 0x01 //��ȡ��ʼֵ���ֵ� Init_FDC[0]=FDC2X14ReadCH(0); Init_FDC[1]=FDC2X14ReadCH(1); Init_FDC[2]=FDC2X14ReadCH(2); Init_FDC[3]=FDC2X14ReadCH(3); } //���ݶ�ȡ //indexͨ������ int FDC2X14ReadCH(u8 index) { int result; switch(index) { case 0x00: result = ReadFDC2X14(DATA_CH0,DATA_LSB_CH0); break; case 0x01: result = ReadFDC2X14(DATA_CH1,DATA_LSB_CH1); break; case 0x02: result = ReadFDC2X14(DATA_CH2,DATA_LSB_CH2); break; case 0x03: result = ReadFDC2X14(DATA_CH3,DATA_LSB_CH3); break; } // printf("result=%d \r\n",result); return result; } void SetFDC2X14(u8 Address,u8 MSB,u8 LSB) { IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(Address); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(MSB); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(LSB); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); } unsigned int ReadFDC2X14(u8 firstAddress,u8 secondAddress) { unsigned int temp; u8 result[4]; IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(firstAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[0]=IIC_Read_Byte(1);//���ֽ� ����λ���� result[0] = result[0]<>4; IIC_Ack(); ADS_delay(); result[1]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(secondAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[2]=IIC_Read_Byte(1);//���ֽ� ����λ���� IIC_Ack(); ADS_delay(); result[3]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); temp = (unsigned int)(((result[0]<< 24) | (result[1] << 16) | (result[2] << 8) | (result[3] & 0xff))); return(temp); } unsigned int ReadFDC2X14_1(u8 firstAddress) { unsigned int temp; u8 result[4]; IIC_Start(); IIC_Send_Byte(FDC2X14_W); IIC_Wait_Ack(); ADS_delay(); IIC_Send_Byte(firstAddress); IIC_Wait_Ack(); ADS_delay(); IIC_Stop(); ADS_delay(); IIC_Start(); IIC_Send_Byte(FDC2X14_R); IIC_Wait_Ack(); ADS_delay(); result[0]=IIC_Read_Byte(1);//���ֽ� ����λ���� IIC_Ack(); ADS_delay(); result[1]=(IIC_Read_Byte(1)); //temp=���ֽ�+���ֽ� IIC_Ack(); IIC_Stop(); ADS_delay(); temp=(result[1]<<8)+result[1]; return(temp); } /*������·���� *index:0����·0 * 1����·1 * 2����·2 * 3����·3 *����ֵ����·�ܵ���C */ float Cap_Calculate(u8 index) { float Cap,cap_init; Data_FDC[index]= FDC2X14ReadCH(index); Cap = 114262451.63/(Data_FDC[index]); cap_init=114262451.63/(Init_FDC[index]); return (Cap*Cap)-(cap_init*cap_init); } float Cap_Calculate_Xtimce(u8 timce,u8 index) { float Cap; u8 i; Cap=0; for(i=0;i

文件下载

评论信息

免责申明

【只为小站】的资源来自网友分享,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,【只为小站】 无法对用户传输的作品、信息、内容的权属或合法性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论 【只为小站】 经营者是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。
本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二条之规定,若资源存在侵权或相关问题请联系本站客服人员,zhiweidada#qq.com,请把#换成@,本站将给予最大的支持与配合,做到及时反馈和处理。关于更多版权及免责申明参见 版权及免责申明