接口通信程序设计C语言版附带实验报告

用C语言做的DOS界面的串口通信程序 void setPort(int size, char check, int stop){ unsigned char b = 0x00; disable(); switch(size){ case 6:b |= 0x01; break; case 7:b |= 0x02;break; case 8:b |= 0x03; break; } switch(check){ case 'N': case 'n':b &= ~0x08;break; case 'J': case 'j':b |= 0x08; break; case 'O': case 'o':b |= 0x18;break; } switch(stop){ case 1: b &= ~0x04;break; case 2: b |= 0x04;break; } outportb(PORT[PORTNUM] + 3, b); /*register interrupt*/ outportb(PORT[PORTNUM] + 1, 0x01);/*接收中断*/ outportb(PORT[PORTNUM] + 4, 0x0b);/*零MODEM，恒有效状态*/ oldhandle = getvect(INTR[PORTNUM]);/*取得硬中断向量表的中断处理程序*/ setvect(INTR[PORTNUM],newhandle); /*开启IRQx*/ outportb(0x21, inportb(0x21) & INTRENTER[PORTNUM]); enable(); } /* baund:波特率 */ void initCom(int baund){ unsigned char b; disable(); outportb(PORT[PORTNUM] + 3, 0x80);/*设DLAB=1*/ outportb(PORT[PORTNUM] + 1, 0X00);/*高八位设0*/ switch(baund){ case 2400:b = 0x30;break; case 3600:b = 0x20;break; case 4800:b = 0x18;break; case 7200:b = 0x10;break; case 9600:b = 0x0c;break; } outportb(PORT[PORTNUM], b); enable(); } void closeCom(){ disable(); setvect(INTR[PORTNUM],oldhandle); enable(); } void setDefineOpion(){ } void readOpion(){ } int AcceptOrRefuse(){ int index=0; int key = 0; int ret; char str[2][7]={"accpet","refuse"}; while(key!=13) { gotoxy(12,5+index); textcolor(15); printf("%s",str[index]); index=1-index; gotoxy(12,5+index); textcolor(13); printf("%s",str[index]); key=bioskey(0); key=key&0xff; } if (index == 0){ ret = 0; strcpy(sendmsg, "_accept"); strcat(sendmsg, "\0"); sendMessage(); } else { ret = 1; strcpy(sendmsg, "_refuse"); strcat(sendmsg, "\0"); sendMessage();