Aerotech A3200 Training_V1.1.pdf

上传者: Qq843182350 | 上传时间: 2021-12-20 21:09:46 | 文件大小: 6.18MB | 文件类型: -
激光行业中及一些高精度需求的行业中关于硬件的介绍,包括软件的一些编译D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of electrical shock, bodily injury, or death the following precautions must be followed. 1. Disconnect electrical power before servicing equipment. 2. Disconnect electrical power before performing any wiring. 3. Access to the Ndrive CP and component parts must be restricted while connected to a power source. 4. To minimize the possibility of electrical shock and bodily injury, extreme care must be exercised when any electrical circuits are in use. Suitable precautions and protection must be provided to warn and prevent persons from making contact with live circuits. 5. Install the Ndrive CP inside a rack or enclosure. 6. The shunt resistor temperature can exceed 70°C during normal operation and contains lethal voltage on its terminals and surface. It must be properly enclosed and shielded to avoid risk of fire and operator shock. 7. Do not connect or disconnect any electrical components or connecting cables while connected to a power source. 8. All components must be properly grounded in accordance with local electrical safety requirements. 9. Operator safeguarding

文件下载

评论信息

免责申明

【只为小站】的资源来自网友分享,仅供学习研究,请务必在下载后24小时内给予删除,不得用于其他任何用途,否则后果自负。基于互联网的特殊性,【只为小站】 无法对用户传输的作品、信息、内容的权属或合法性、合规性、真实性、科学性、完整权、有效性等进行实质审查;无论 【只为小站】 经营者是否已进行审查,用户均应自行承担因其传输的作品、信息、内容而可能或已经产生的侵权或权属纠纷等法律责任。
本站所有资源不代表本站的观点或立场,基于网友分享,根据中国法律《信息网络传播权保护条例》第二十二条之规定,若资源存在侵权或相关问题请联系本站客服人员,zhiweidada#qq.com,请把#换成@,本站将给予最大的支持与配合,做到及时反馈和处理。关于更多版权及免责申明参见 版权及免责申明