C#开发，支持ModbusTCP的01、02、03、04、05、15、16等功能操作，包含浮点REAL和双整形数DINT，使用简单方便，压缩包内有代码和说明；

POE以太网供电系统设计 亲测可用 可以直接制版使用 全套，bom pcb sch gerber

采用Verilog编写，已经经过项目验证。 使用方法： 1.拷贝到硬盘。 2.用ISE创建项目，分别加入各个代码文件，即可。

android4系统实现以太网来分享设备的internet网络（4G/wifi），framework层强制修改eth0以太网类型，实现以太网路由功能，主要修改EthernetDateTracker.java

行业资料-电子功用-带有以太网总线的光幕控制电路.pdf.zip

此文档及其文件不一定能解决所有问题

以太网交换机原以太网交换机原理与应用.pdf

POE以太网供电照明智能系统.pdf.zip

FLEX Ethernet协议标准，OIF ABSTRACT: The Flex Ethernet (FlexE) Implementation Agreement provides a generic mechanism for supporting a variety of Ethernet MAC rates that may or may not correspond to any existing Ethernet PHY rate. This includes MAC rates that are both greater than (through bonding) and less than (through sub-rate and channelization) the Ethernet PHY rates used to carry FlexE. This can be viewed as a generalization of the Multi-Link Gearbox implementation agreements, removing the restrictions on the number of bonded PHYs (MLG2.0, for example, supports one or two 100GBASE-R PHYs) and the constraint that the FlexE clients correspond to Ethernet rates (MLG2.0 supports only 10G and 40G clients).

XILINX FPGA开发板 SPARTAN6 XC6SLX16 DDR3 千兆以太网开发板PDF原理图PCB+ALLEGRO原理图库PCB库文件