jlinkV8指示灯不亮 usb无法识别的问题 通过此教程可以快速刷新固件回复jlink的使用，方便快捷

该文件包含 jlink ob stm32f072 的原理图 pcb图 固件，仅供学习使用，禁止商用。禁止任何商用盈利行为。 相关展示贴 https://blog.csdn.net/qq_39663845/article/details/89225694 ps：发现个错误，GPIOB的丝印是错的，重新上传麻烦，就不上传了

segger j link keygen 使用jflash烧程序的时候需要的license

J-Link Software and Documentation pack for Windows Installing the software will automatically install the J-Link USB drivers and offers to update applications which use the J-Link DLL. Multiple versions of the J-Link software can be installed on the same PC without problems; they will co-exist in different directories.

• Any ARM7/ARM9, Cortex-M0/M1/M3/M4 and Renesas RX600 core supported • Microcontroller (internal flash) support. • Support for most external flash chips (For more information please refer to Target systems on page 75). • High speed programming: up to 200 KBytes/sec* (depending on flash device). • Very high speed blank check: approximately 16 MBytes/sec (depending on the chip). • Smart read back: only non-blank portions of flash are transferred and saved. • Free evaluation licenses available. • Verbose logging of all communication. • .hex, .mot, .srec, and .bin support. • Intuitive user interface. 仅用于学习用途，解释权归SEEGER所有

JLINK V8转接板原理图为开发者提供了二次开发资料

该资源包含J-LINK 固件恢复工具和需要的bin固件，实用简单，快速复活你的jlink。

新版MDK-RAM_v5.25.2使用JLink下载调试““**JLink Warning: Mis-aligned memory read: Address: ......”错误解决

非常棒的资源，用来刷jlink V8固件非常的好用

传统的stm32单片程序的调试和下载需要连接笨重的JLINK，而这个 JLINK&串口二合一，只有U盘的大小，并且JLINK和串口集成到一块，不再需要更换串口