jlink驱动,SEGGER-Setup_JLinkARM_V460a,旧版本驱动比较稳定,供大家下载参考使用

由于V11是新产品，老版本软件无法支持功能完整性，使用中会出现异常情况，建议使用6.56以上的软件，使用KEIL请检查DLL版本是否过低，过低则会导致不兼容KEIL软件假死，连不上开发板等情况 DLL解决方法，文件包里面有6.56软件安装包，或在官网下载JLINK新版本软件，先关闭KEIL，安装新版本软件，然后再打开KEIL即可看到DLL文件已更新

JLink工具，用于单片机调试、烧写、解锁等等 JLink工具，用于单片机调试、烧写、解锁等等 JLink工具，用于单片机调试、烧写、解锁等等 JLink工具，用于单片机调试、烧写、解锁等等

JLink_Windows_V720a

segger jlink最新驱动V4.86版本，可以用

Setup_JLinkARM_V440.7z

JLINK V8驱动

重新烧写jlink固件文档及bin文件 每次我的jlink坏了都是用这个文档重新烧写的

jlink固件及烧写工具

Version V6.70 (2020-03-27) Added debug support for Eta Compute ECM3532 series devices. Added flash programming support for Eta Compute ECM3532 series devices. Apollo3 (plus): Added native SWO support. Added command string "RISCV_SetTEBaseAddr" to support on-chip trace for SiFive target devices. Added support for SiFive RISC-V on-chip trace (Insight trace). NordicSemi nRF5340: Added unsecure support concerning debug protection for the network core. Added support for ARM China STAR core. ST STM32H745/STM32H750 series devices dual SPI flash programming fixed. When having multiple J-Link Remote Server instances running on the same machine, it could happen that when disconnecting one client from one server, the other server also lost its connection. Fixed. For Cortex-M, the DLL did not support >= 16 hardware breakpoints. Fixed. The "unknown device selected" dialog title contained "J-Link V" twice. Fixed. When closing a firmware update messagebox by pressing [ Esc ], the firmware update was still executed. Fixed. Connect to Cortex-M4 of STM32H7x5/x7 series devices, when M7 boot is deactivated, fixed. Added debugging and (internal) flash programming support for Microchip ATSMAE51Gxx and ATSAME51Pxx series devices. Added debug support for Qorvo QPG5071 series devices. Added flash programming support for Qorvo QPG5071 series devices. Added debug support for Qorvo QPG6100 series devices. Added flash programming support for Qorvo QPG6100 series devices. NXP RT106x: QSPI programming did not work for some already supported flashes. Fixed. When a J-Link script file function could not be executed in the J-Link FW a message box popped up with an incorrect title. Fixed. SiLabs EFx32 family: Under special circumstances, connect took up to 60 seconds. Fixed.