1. 打开清零软件主界面。
2. 点击Select按钮，Model Name选择L455，点OK。
3. 选择正确型号后，点击Particular adjustment mode按钮。
4. 左边选择Waste ink pad counter（废墨计数器），点OK，打开废墨计数器面板。
5. 点击Check按钮，获取当前废墨计数器的数值，然后选中计数器前面的选择框，点击Initialization按钮完成初始化。
6. 等待初始化完成，重启打印机即可。
2021-09-28 12:10:50
1.12MB
1
STYLUS C60
STYLUS C61
STYLUS PHOTO 790
STYLUS PHOTO 810
STYLUS PHOTO 830
爱普生清零软件
2021-09-27 06:28:56
2.41MB
1
Epson爱普生L3100 L3101 L3110 L3150 L3168废墨清零软件、清零软件、带教程说明。解压后将文件夹名改短，最好放置到根目录。
2021-09-23 16:15:38
1.58MB
1
Installing the Driver
To install the driver source:
1. Copy the file rtc-rx8130.c into the directory ./linux-3.8.x/drivers/rtc. "linux-3.8.x" refers to
the base of the linux kernel source tree.
2. Add the following lines into the drivers/rtc/Kconfig file:
config RTC_DRV_RX8130
tristate "Epson RX8130CE"
help
If you say yes here you get support for the Epson
RX8130CE RTC chips.
This driver can also be built as a module. If so, the module
will be called rtc-rx8130.
3. Add the following line to the drivers/rtc/Makefile:
obj-$(CONFIG_RTC_DRV_RX8130) += rtc-rx8130.o
4. During the rebuild, make sure to include the 'Epson RX8130CE' option in the Kernel
Configuration window under 'Device Drivers' -> 'Real Time Clock'
2021-09-22 15:56:34
1.54MB
1