杰特逊-MCP3008
一个简单的示例，该示例通过NVIDIA Jetson nano上的SPI通过MCP3008读取模拟输入。
MCP3008是具有8个模拟输入通道的模数转换器（ADC）芯片，具有约10位的分辨率。 这是对没有通用模拟输入的Jetson nano的便捷补充。 您可以以大约4美元的价格购买MCP3008。 例如： ：
主机准备：
对于NVIDIA Jetson nanos上的SPI，您需要在主机上运行它：
sudo mkdir -p /boot/dtb
sudo cp -v /boot/tegra210-p3448-0000-p3449-0000-[ab]0[02].dtb /boot/dtb/sudo
sudo find /opt/nvidia/jetson-io/ -mindepth 1 -maxdepth 1 -type d -exec touch {}/
2022-11-23 14:22:16
5KB
1
jetson nano torch1.7.0 torchvision 0.8.0
2022-11-14 18:34:58
250.72MB
1
Jetson Nano Tensorflow 安装包
tensorflow_gpu-2.0.0+nv19.11-cp36-cp36m-linux_aarch64.whl
2022-11-12 11:22:41
198.39MB
1
matplotlib-3.5.3-cp37-cp37m-manylinux_2_17_aarch64.manylinux2014_aarch64注意版本要求python为3.7
2022-09-26 21:05:15
10.95MB
1
适用于jetson nano的anaconda
Archiconda3-0.2.3-Linux-aarch64.zip
github有时候下载不了
2022-09-26 16:05:19
38.73MB
1
jetson nano 的pytorch
版本
torch-1.11.0a0+17540c5+nv22.01-cp36-cp36m-linux_aarch64.zip
2022-09-26 16:05:18
173.78MB
1
tc358843-for-jetson-nano 2g
tc358843 for jetson nano for some taobao board
driver & device tree demo for jetson nano
1080p60 was worked
the “冬虫电子” board has been tested.
restriction
can't changge resolution by softwear,resolution determined by input hardwear.you should custom on the input device or use gst(ffmpeg) to encode to other resolution.
the camera can't use,please reflash the orgin drive t
2022-06-21 19:32:08
2.78MB
1
jetson-nano-image：为NVIDIA jetson nano板创建自己的图像
2022-06-07 16:48:00
16KB
1