AB与西门子PLC通讯方案rar,AB与西门子PLC通讯方案

西门子 PLC 通讯线RS485接线图doc,西门子 PLC 通讯线RS485接线图

利用visual basic所开发的opc客户端应用程序主要采用自动化通信接口和opc服务器程序实施通信。而opc基金会提供的opc自动化接口 opcdaauto.dll动态链接库集成了所有用于对opc服务器进行访问的对象、属性和方法，为利用visual basic开发opc客户端应用程序提供了极大方便。程序设计时，opc客户程序应当首先生成opc服务器支持的opc对象，然后再使用opc对象支持的属性和方法，实现对opc服务器的操作和访问。

【达摩老生出品，必属精品，亲测校正，质量保证】 资源名：QT用SNAP7协议和西门子PLC 通讯实例源码.zip 资源类型：程序源代码 源码说明：该程序是 QT用SNAP7写的 和西门子PLC 通讯的例子 ，可编辑。可打开。支持 对西门子PLC 任意区域 读写 bit,byte,word/Dword，Uint,float 等任意数据类型 。线程读取。是通讯的模板程序 适合人群：新手及有一定经验的开发人员

【程序老媛出品，必属精品，亲测校正，质量保证】 资源名：VB与西门子PLCS7-200 通讯实例源码 资源类型：程序源代码 源码说明：VB与西门子S7-200控制器通讯 适合人群：新手及有一定经验的开发人员

【工控老马出品，必属精品，质量保证，亲测能用】 资源名：松下PLC通信示例源码 资源类型：程序源代码 源码说明： C#和西门子PLC通讯例子源码C# VB例子都有 注释详细 适合学习借鉴 适合人群：新手及有一定经验的开发人员

与西门子PLC通讯的Labview库，还不错。 以下是英文声明： Warning, the attached files are experimental VIs provided for educational purposes only. No warrantee is expressed or implied. You should test your code and completely understand the implications of writing to or reading from an operating PLC. PLCs are often used to control hazardous processes and/or equipment. Writing to or reading from a PLC in active control of equipment or process can result in the disruption of the PLC program or data areas, potentially causing economic loss, property damage, generation or release of hazardous substances and/or personal injury up to and including death. Test your software in a controlled environment and qualify it before using it on active equipment or processes. To my knowledge, Siemens has never released the details of the S7 protocol. Much of what is publicly available on S7 is based on observations of the protocol by others. There is an open source S7 data exchange package available at http://libnodave.sourceforge.net/ that documents many S7 features. These VIs were based upon the example posted at http://decibel.ni.com/content/docs/DOC-5467. They were modified by observing and mimicking a S7 data exchange between a protocol converter and a S7-300 series PLC. The observations were accomplished with the wireshark network protocol analyzer, available at http://www.wireshark.org/ and the Wireshark Plugin f黵 S7-Protokoll, available at http://sps-forum.de/showthread.php?p=202763. The Address Area parameter determines which PLC memory area is the target for the reads and writes. I have only tested reads and writes to the Data Block (DB) Area. Your application should read and write to separate read and write DBs dedicated for transfer only. By confining reads and writes to dedicated Data Blocks, the risk of unintended overwrites may be reduced. The data type: S7Com_Transport_Size.ctl is a ring variable that contains the parameter for the size or type of the transfer. I have only had success with the BYTE, INT and DINT transport sizes on an S7-300 series PLC. The other sizes remain in the ring variable for testing on other PLCs. I do not know if the bytes of a multiple-byte variable are read or written atomically. The example contains two top-level VIs: S7Com_Once.vi and S7Com_W+R_Loop.vi. S7Com_Once.vi performs one read or write per execution. It writes to the target PLC from an array of I32, it reads from the target PLC into an array of I32. The number of bytes written is proportional to the number of elements in the array to be written and the transport size parameter. S7Com_W+R_Loop.vi regularly writes to and reads from a pair of DBs in the target PLC. In order to use it, your Step7 PLC project should provide two Data Blocks, DB11 and DB12. See the screen capture image db11&12.PNG for their layout. After downloading the DBs to your PLC, monitor and change DB VAlues with a VAT. As can be seen in the VI, the transfer size is DWORD. Included are example VIs (S7Com_to_PLC(SubVI).vi and S7Com_from_PLC(SubVI).vi) to map variables between Labview and the S7 PLC DBs. In the example, they use the same cluster type definition (S7Com_PLC_Data.ctl) but that is not a requirement. When you change the mappings, you must calculate the size of the variables to be read from the PLC in order to use the correct Read Length parameter. The read length parameter is in transport size units. The write length parameter is taken from the size of the write data array, so if the write data array is larger than you anticipate, data may be overwritten. The hex byte and hex byte array type definitions were created to format the internal data structures to show hex values so that they could be easily compared to the wireshark packet dumps. These VIs have been minimally tested on a NI 9072 cRIO. This is not finished. Needed are better error checking, cleaner S7 Response decoding, and stress testing with malformed data.

delphi调用snap7，和西门子plc通讯

超详细西门子PLC S7,TCP,UDP,MODBUS等通讯详解操作教程

1.该程可以实现c#与西门子全系列plc(200smart，300，400，1200，1500)的以太网s7通讯，通讯传输快稳定。 2.该程序采用.dll动态链接库方式，是最近几年才出来的一种与西门子plc通讯的方式，本人经过几个星期的测试，找到他的所有使用方法和注意事项，并开发了一个通用类库可以读取写入各种类型的数据，字符串，bool，16位整数，32位整数，浮点数还有struct数据结构。