Intel 8代及以上装WIN7会出现蓝屏或无法安装系统的情况，除了必要的BIOS设置外，系统还需要注入USB３.0和ＮＶＭe驱动。如果是装ghost版的，一般都有集成，装原装的才需要注入

P9D-I 增加nvme 协议 编程器固件写入即可用

修改好的技嘉G1 Sniper B5支持NVMe固态硬盘BIOS,版本为F9~~v1.0主板可正常使用！

NVM ExpressTM (NVMeTM) Base Specification revision 1.4 and prior revisions define a register level interface for host software to communicate with a non-volatile memory subsystem over PCI ExpressTM (NVMeTM over PCIeTM ). This specification defines extensions to NVMe that enable operation over other interconnects (NVMeTM over Fabrics). The NVM Express Base Specification revision 1.4 is referred to as the NVMe Base specification. The mapping of extensions defined in this document to a specific NVMe Transport are defined in an NVMe Transport binding specification. This document contains an NVMe Transport binding specification for RDMA and TCP. The NVMe Transport binding specification for Fibre Channel is defined in INCITS 540 Fibre Channel – Non-Volatile Memory Express (FC-NVMe), refer to http://www.incits.org.

nvme协议，感兴趣的可以下载看看

我的主板是P8B75-V 原BIOS是1601升级为ASUS-1608并且添加nvme协议后可以安装系统

check_smart：监视插件，以使用SMART检查硬盘驱动器，固态驱动器和NVMe驱动器

三星固态驱动Samsung NVMe Driver MOD-202001_V3.3.2003

三星Nvme驱动,海力士固态硬盘可用,修改硬件ID,shutdown /r /o /f /t 00,关闭驱动数字签证可强行安装,win7,win8可在安装在其他硬盘之后使用Ghost备份到Nvme硬盘上!

已改好华南X79主板BIOS支持NVME固态硬盘