智能割草机专用标准，iec 60335-2-107，
It has been assumed in the drafting of this International Standard that the execution of its
provisions is entrusted to appropriately qualified and experienced persons.
This standard recognizes the internationally accepted level of protection against hazards such
as electrical, mechanical, thermal, fire and radiation of machines when operated as in normal
use taking into account the manufacturer's instructions. It also covers abnormal situations that
can be expected in practice and takes into account the way in which electromagnetic
phenomena can affect the safe operation of machines.
This standard takes into account the requirements of IEC 60364 as far as possible so that
there is compatibility with the wiring rules when the machine is connected to the supply
mains. However, national wiring rules may differ.
If a machine within the scope of this standard also incorporates functions that are covered by
another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far
as is reasonable. If applicable, the influence of one function on the other is taken into
account.
When a part 2 standard does not include additional requirements to cover hazards dealt with
in Part 1, Part 1 applies.
2021-05-12 15:22:58
2.24MB
1
pyGCO-master用于gco-v3.0软件包的python包装器，用于基于图割的MRF优化。.zip
2021-05-11 14:06:05
381KB
1
为研究掘进机截割主轴在外力作用下的受力情况,应用三维建模软件Solidworks对掘进机截割主轴进行三维建模,通过有限元分析软件ANSYS模拟截割主轴在掘进过程中的受力情况,得到在不同煤岩外力作用情况下主轴的应力分布。有限元分析可以提高设计效率,为结构优化和改进提供理论基础。
2021-05-07 16:16:41
381KB
1
最新完整英文版UL 1447：2020 Standard for Electric Lawn Mowers（电动割草机标准）。
本标准涵盖根据ANSI / NFPA 70使用的额定电压为250伏或以下的带电缆连接的电动割草机，还包括电池供电的割草机，电池供电的割草机在本标准的补充条款中有所规定。
1.3这些要求不包括ANSI / NFPA 70中定义的在危险场所使用的设备。不适用于闷热型割草机，园林拖拉机或其附件，梿状割草机，镰刀割草机，机器人割草机或打算用于商业用途的割草机。
2021-04-07 09:05:03
20.76MB
90%的工厂采用2D编程作业模式 越来越多的工厂在寻找3D线割方案，以使CAD/CAM一体化，易管理 长期以来，UG缺乏合适的线割NC后处理，导致大家只能用2D编程 长期以来，UG线割模块自身的BUG一直没能修复 UG线割加工策略少，不能满足车间要求
综合以上的原因,很少有厂家使用UG做线割加工，UG线割本身缺点 很多，需要花费很多时间处理各种不足。鉴于此，东莞维斯德软件科 技有限公司从去年8月份开始开发UG线割自动编程功能，旨在解决行 业痛点难点。
2021-04-01 17:05:42
2.65MB
1
可以实现割草机的红外遥控，经典PID控制，通过配置编码器进行测速，代码有详细解释，同时我的主页还有关于这个控制代码的说明
2021-03-10 19:01:48
11.76MB
综述了图割的基本理论框架及利用图割解决问题时的主要流程和图割方法存在的难点问题．介绍了图割的发展状况及图割的应用领域，指出了其中的公开问题，并对图割未来的研究方向做出展望．
2021-03-02 20:02:41
356KB
1