资料包括硬件选型、硬件连接、软件编程以及阿里云平台和手机端的实现，包括视频教程、程序和一些说明文档，百度云链接分享。

DHT11温湿度检测系统，1602显示程序

通过内嵌CAN控制器的STM32f103ct86单片机做的一个温湿度检测系统设计

该论文为本人的大学本科毕业论文,全套论文不到70页,格式已经设置好,分享给大家做个学术交流,本人东北石油大学自动化专业,该论文是基于51单片机的温湿度传感器检测控制系统。有不足的地方欢迎大家指出,谢谢!

基于51单片机温湿度检测及报警系统设计

基于labview多通道数据采集，湿度监测系统

电子DIY--土壤湿度检测模块，视频教程： 基于51单片机的土壤湿度检测传感器模块： https://www.bilibili.com/video/BV1Q54y1179r/

粮仓温湿度检测与控制系统的源程序 运用STC15F2K60S2作为单片微控制器，以DHT11为温湿度传感器，以LCD1602作为显示，制作了一套基于单片微控制器的粮仓温湿度检测及控制系统，可对粮仓的温度湿度进行一定的测量、显示与高低温湿的报警。应用温湿度传感器DHT11，它会把温湿度的数据信息进行不同程度的收集。它是应用单总线通信的数字式温湿度传感器，该系统将通过IO口读取收集到的信息用来一定的操作处理后把温湿度值实时发送到LCD1602上。此外，能够用按键来设定温湿度的额定范围，当温湿度不在所规定的额定范围内就发出警报。

本文件为模拟IIC驱动TH06的demo程序，The TH06 I2C Humidity and Temperature Sensor is a monolithic CMOS IC integrating humidity and temperature sensor elements, an analog-to-digital converter, signal processing, calibration data, and an I2C Interface. The patented use of industry-standard, low-K polymeric dielectrics for sensing humidity enables the construction of lowpower, monolithic CMOS Sensor ICs with low drift and hysteresis, and excellent long term stability. The humidity and temperature sensors are factory-calibrated and the calibration data is stored in the on-chip nonvolatile memory. This ensures that the sensors are fully interchangeable, with no recalibration or software changes required The TH06 is reflow solderable. It can be used as a hardware- and software-compatible drop-in upgrade for existing RH/ temperature sensors , featuring precision sensing over a wider range and lower power consumption. The optional factory-installed cover offers a low profile, convenient means of protecting the sensor during assembly (e.g., reflow soldering) and throughout the life of the product, excluding liquids (hydrophobic/oleophobic) and particulates. The TH06 offers an accurate, low-power, factory-calibrated digital solution ideal for measuring humidity, dew-point, and temperature, in applications ranging from HVAC/R and asset tracking to industrial and consumer platforms.

此程序设计是基于51单片机开发的，通过DHT11传感器检测空气的温度和湿度，并通过1602液晶显示出来，同时通过串口通信，将其显示在PC机上