prorues6.9以上版本与keil联调所用的补丁

单片机模拟调试插件vdmagdi 要的来下巴

vdmagdi.exe联调软件软件仿真protues与keil

该文件支持keil3的arm和c51仿真 　　如果安装的keil为MDK321PRC.EXE及其以后版本，则需要修改keil目录下的Tools.ini 　　[ARMADS] 　　PATH="C:\Keil\ARM\" 　　PATH1="BIN31\" 　　添加： 　　TDRV8=BIN\VDMARM.DLL ("Proteus VSM Simulator")

keil和proteus联调驱动，远程开发必备软件驱动程序 .

vdmagdi，keil与Proteus联调所需插件，安装完vdmagdi后，在keil工程里选配置，output选中生存hex文件，Debug选中Proteus VSM simulator

keil和proteus联机仿真需要用到的vsm，7.4的版本也可以用

This plug-in for the Keil IDE allows you to use the Keil debugging environment to single step code running on simulated hardware inside Proteus VSM. Think of it as like working with an In Circuit Emulator or Debugger (ICE or ICD) but without any physical hardware. The Keil driver communicates with Proteus using TCP/IP so you can run MPLAB and Proteus on separate machines linked via your office LAN if you so wish. Alternatively, both packages can be used on the same machine using the TCP/IP loopback address. Two drivers are provided - one for the 8051 variants and one for ARM/LPC2000. To use a particular driver, please download the self-extracting executable and install it on the same machine as your copy of Keil. During setup select the version of Keil that you are using (uVision2 or uVision 3) and then proceed with the install normally.

欢迎下载。具体安装步骤请自行百度^^ 欢迎下载。具体安装步骤请自行百度^^ 欢迎下载。具体安装步骤请自行百度^^ 欢迎下载。具体安装步骤请自行百度^^ 欢迎下载。具体安装步骤请自行百度^^ 欢迎下载。具体安装步骤请自行百度^^

Keil MDK ARM &C51 和Proteus 联调时所需的VDMARM.dll VDM51.dll，以及程序vdmagdi.exe