Abstract ——This article deals with a phase-locked loop (PLL)- based novel control for wind turbine driven doubly fed induction generator interfaced to utility grid with a battery energy storage (BES) connected at the dc link. The control of grid-side converter (GSC) is modified to export/import constant power to/from the grid. The state of charge of BES helps in deciding the reference export power to the grid apart from the manual selection using averaged wind power in a particular period of time. An off maximum power point tracking logic is incorporated in the rotor-side converter (RSC) control to operate the BES within its constraints and, moreover, to feed constant power to the grid. In addition, the energy management scheme of the system is presented in the form of flowchart for both exporting and importing power to/from the grid. The RSC and GSC have taken care of unity power factor operation at stator terminals and to mitigate harmonics and grid currents balancing, respectively. The system performance is found robust as the PLL response is not affected even under grid voltages with dc offset. The system is modeled and simulations are carried out in MATLAB using SimPowerSystems tool box. Moreover, the control scheme performance is compared with conventional control algorithms both in terms of PLL and converter controls. To validate the effectiveness of the control scheme, a prototype of the system is developed. Test results demonstrate the satisfactory performance of the system under various operating conditions.

Abstract —— The doubly fed induction generator is particularly appropriate to be used in wind power generation systems. However, in weak grids its stator connection to unbalanced or distorted voltages imposes low frequency and high amplitude rotor current harmonics. Also, the grid side converter must deal with the same voltage conditions. The paper addresses the first issue presenting a voltage harmonics controller in the dq reference frame to be included in the high dynamics rotor current controller. Simulation and experimental results demonstrate the performance of the proposed controller imposing a sinusoidal input current.

行业资料-电子功用-低转速盘式双馈发电机及其励磁电流施加方法.zip

针对在MATLAB/SIMULINK中没有给出能够空载运行的双馈电机模型的问题,推导了双馈发电机的空载数学模型,并在MATLAB/SIMULINK中搭建出来,用以实现双馈发电机空载并网仿真研究。经过仿真与实验验证了此方法的正确性。

simulink仿真，双馈风力发电机并网仿真。