DOS下运行 eeupdate.exe /nic=1 /mac=xxxxxxxxxxxx EEUPDATE v5.30.10.00 Copyright (C) 1995 - 2017 Intel Corporation Intel (R) Confidential and not for general distribution. ----------------------------------------------------- Options: /HELP or /? Displays command line help. /EXIT

Eeupdate.exe支持I219LM和I219V网卡刷写MAC地址，MAC刷写方法： 在CMD命令提示符下按以下格式运行： eeupdate.exe /nic=1 /mac=xxxxxxxxxxxx

Using: Intel (R) PRO Network Connections SDK v2.30.10 EEUPDATE v5.30.10.00 Copyright (C) 1995 - 2017 Intel Corporation Intel (R) Confidential and not for general distribution. ----------------------------------------------------- Options: /HELP or /? Displays command line help. /EXITCODES Displays exit code help. /ALL Selects all adapters found in the system. /NIC=XX Selects a specific adapter (1-32). /BUS=XX Selects PCI bus of adapter to program. Must be used with the DEV parameter to specify an adapter. /DEV=XX Selects PCI device of the adapter to program. Must be used with the BUS parameter to specify an adapter. /FUN=XX Selects PCI function of the adapter to program. Must be used with both the BUS and DEV parameters to specify an adapter. Press to continue... /DEVICE= 4 hex digit device id of card to program. /SUBDEVICE= 4 hex digit subsystem device id of card to program. /DUMP Dumps EEPROM/Shadow RAM memory contents to file *.eep and flash memory to *.bin (if available) /MAC_DUMP_FILE Dumps the MAC address to a file usable by the /A command. /MAC_DUMP Displays the adapter LAN MAC address. /MAC_DUMP_ALL Displays all the MAC addresses. /MAC_ALL_TO_FILE Dumps all the MAC addresses to a file usable by the /MAC_ALL_FROM_FILE command. /MAC_ALL_FROM_FILE Programs all MAC addresses from text file to a device. File should contain 13 MAC addresses (9 for PEPs and 4 custom MAC addresses), one each line. EUI48 and EUI64 formats accepted. /CB Clears bits in the EEPROM, specified in . /SB Sets bits in the EEPROM, specified in . Press to continue... /RW Reads from the EEPROM. /WW