s110_nrf51_8.0.0 The main features of this release are the ability to set the size of the GATT Server Attribute Table when initializing the BLE stack, the possibility for the application to be notified when the SoftDevice receives scan requests, and the ability to disable RF channels for advertising. Changes to CPU availability during radio events, DC/DC converter configuration, and PPI channel allocations have been made to take advantage of the nRF51 series IC revision 3. The BLE API has been aligned to that of the S120 SoftDevice. Notes: This is a major release which has changed the Application Programmer Interface (API), requiring applications to be recompiled. This SoftDevice version is not Production tested on all IC revisions, and is not compatible with nRF51 IC revision 1. Users of the SoftDevice must verify the compatibility of their SoftDevice/IC combination for development and for production. Compatibility information is found in the nRF51 Series Compatibility Matrix, which can be downloaded from the Nordic Semiconductor web page. SoftDevice properties The SoftDevice Specification corresponding to this release is the S110 SoftDevice Specification v2.0. This version of the SoftDevice contains the Master Boot Record (MBR) version 1.0.1. The combined MBR and SoftDevice memory requirements for this version are as follows: Flash: 96 kB (0x18000 bytes). RAM: 8 kB (0x2000 bytes) (default value - dependent upon configured size of the GATT Server Attribute Table). New functionality SoftDevice The application can now configure the amount of memory reserved for the GATT Server Attribute Table when initializing the BLE stack (DRGN-3744). Configuration is optional. By default, the RAM reserved for the Attribute Table will be 0x700 bytes. This is the same default allocation as in the S110 v7.1.0. GAP The application can now configure the SoftDevice to deliver events when scan request packets are received (DRGN-2880, NRFFOETT-281). The application can now selectively disable RF channels used for advertising (DRGN-2598, NRFFOETT-179).

Nordic nRF51822 SoftDevice(S110-5.2.1)

戴尔集成阵列卡S110驱动，适用于windows系统，server2008R2和win2012安装系统时识别不到硬盘的问题

西门子SINAMICS S110调试手册pdf,西门子SINAMICS S110调试手册：Sinamics S110 产品用于基本的伺服控制，由控制单元及功率模块组成，功率范围从0.12 ~ 90 kw。主要用应用为机械工程及工厂设备中的单轴定位。在SINAMICS 家族中，S110 位置驱动器设计与S120 产品一致，但只能用于伺服控制。可使用Sizer 软件进行选型配置，使用Starter 或SIMOTION SCOUT 软件进行调试。

蓝牙协议栈。NRF51822的softDevice。在NRF studio 中下载即可。softDevice版本：S110_7.0.0

戴尔（DELL）服务器主板集成raid型号为PERC-S110的驱动，适用于win7和win2008r2系统；在安装系统的时候通过优盘加载即可。

NRF51822SDK+S110协议栈：SDK版本6.1.0，S110版本7.0.0，两者匹配可用