改资源为作者在写LVDS学习笔记之lvds_transceiver设计及仿真时所用到的工程，文件中包含了所有文件，读者可根据自己的需求进行改动，以达到自己的目的。

实现基于软件无线电的OFDM系统仿真，利用USRP平台实现收发信号

ADI adrv9026 Transceiver 开发用户手册

ADI Transceiver adrv9026 datasheet

CIC滤波器适用于高倍抽取率的情况。这篇文章讲述了CIC基本原理，并将CIC转换为非递归结构形式，将CIC多项式分解，为K级CIC抽取，每级为2倍抽取，这样将CIC设计难度降低。且每一级使用多相抽取实现，降低系统资源和功耗。特别适合高倍抽取第一级。

Signal Processing and Optimization for Transceiver Systems 最好的版本

收发器（Transceiver） 收发器即调制解调器 调制：发射时基带信号加载到射频信号 解调：接收时射频信号过滤出基带信 Transceiver根据其工作频率可分为：单频、双频、三频等 Transceiver根据其中频特征可分为有中频、零中频、近零中频等 以DB2009为例介绍Transceiver UAA3535的内部结构

无线收发系统设计 射频收发器原理和设计，相当有用的书籍，英文高清版本 作者信息：Wolfgang Eberle Katholieke Universiteit Leuven Interuniversity Microelectronics Center (IMEC) Leuven Belgium

JESD204B链路调试方案

The TJA1080 is a FlexRay transceiver, which is compatible with the FlexRay electrical physical layer specification V2.1 Rev. A (see Ref. 1). It is primarily intended for communication systems from 1 Mbit/s to 10 Mbit/s, and provides an advanced interface between the protocol controller and the physical bus in a FlexRay network. The TJA1080 can be configured to be used as an active star transceiver or as a node transceiver. The TJA1080 provides differential transmit capability to the network and differential receive capability to the FlexRay controller. It offers excellent EMC performance as well as high ESD protection. The TJA1080 actively monitors the system performance using dedicated error and status information (readable by any microcontroller), as well as internal voltage and temperature monitoring. The TJA1080 supports the mode control as used in Philips TJA1054 (see Ref. 2) and TJA1041 (see Ref. 3) CAN transceivers.