包含所有SATA规范：SerialATA_Revision_2_5_Gold、SerialATA_Revision_2_6_Gold、SerialATA_Revision_3_0_Gold、SerialATA_Revision_3_1_Gold、SerialATA_Revision_3_2_Gold、SerialATA_Revision_3_3_Gold、SerialATA_Revision_3_4_Gold、SerialATA_Revision_3.5a

SATA;Serial ATA 2.6 Revision gold Spec. Serial ATA International Organization: 15-2-2007. 600 page

Serial ATA官网http://www.sata-io.org/的最新规范，Serial ATA规范3.2 Gold版

Serial ATA官方发布的最新SATA协议

AHCI标准手册，SATA-revision2.6标准手册，BSP驱动开发人员必备

这是Serial ATA international organization出的sata 2.6的协议手册，涵盖了sata相关的基础内容以及相关命令，对于学习SATA协议的小伙伴都非常推荐。

SerialATA_Revision_3_2_Gold(with Links)

Release that incorporates errata against Revision 3.2: a) ECN073 - CIC Clarification; b) ECN074 - SATA Express Pin Sequencing; c) ECN075 - Identify Device data log and Word correction; d) ECN076 - Flow control; e) ECN077 - Automatic Partial to Slumber No NCQ; f) ECN078 - Queued Error I-bit Correction; g) ECN079 - TPR056 Corrections for Power Disable; h) ECN080 - NCQ Feature Set Clarification; i) ECN081 - Missing bit in ID data log for Rebuild Assist; j) ECN082 - FCOMP D24.2 Correction; k) ECN083 - Tx impedance balance cleanup; l) ECN084 - Slimline Figure Move; m) ECN085 - mSATA Figure Cleanup; n) ECN086 - Clarifying NCQ Commands; o) ECN087 - Missing bit in ID data log for Hybrid Information Enable; p) ECN088 - Enclosure services signature; and q) ECN089 - DSS/DAS Support Clarifications, and the following new features and enhancements: a) TPR056 - Enable new Power Disable feature on standard SATA connector P3; b) TPR057 - Register Signature definition for Host Managed Zoned devices; c) TPR058 - DAS/DSS/DHU Changes; d) TPR059 - Emphasis Control for SATA Interface; e) TPR060 - Modify/Cleanup Receive FPDMA Queued to support ZAC; f) TPR061 - Define/Use Sequential NCQ command(s); g) TPR062 - SEND/RECEIVE FPDMA Queued Cleanup; h) TPR063 - Align Queued DATA SET MANAGEMENT with ACS-4; i) TPR064 - Queued version of ACS-4 ZERO EXT command; j) TPR065 - Modernize Aux Field in NCQ NON-DATA Command; k) TPR066 - Reporting Current Write Pointer for NCQ Errors in Write Pointer Zones; l) TPR067 - FPDMA Zone Management Commands; m) TPR068 - Clarification of the FPDMA state machine and error reporting; n) TPR069 - MFTP Measurement Method for Emphasis; o) TPR070 - Retire ICC Field in SEND / RECEIVE FPDMA QUEUED; p) TPR071 - Addition of ZAC Management In/Out to NCQ Non-Data log (12h) and NCQ Send and Receive log (13h); q) TPR072 - Add Deferred Errors to NCQ Error log; r) TPR073 - IDENTIFY DEVICE Revision Updates; s) TPR074 - Obsolete Parallel ATA Emulation; and t) TPR075 - Add DATA SET MA

SATA 3.2最新规范，无删减带链接。