具有大角度扫描能力的平面相控阵天线研究

A surface plasmon resonance (SPR) sensing system based on the optical cavity enhanced detection technique is experimentally demonstrated. A fiber-optic laser cavity is built with a SPR sensor inside. By measuring the laser output power when the cavity is biased near the threshold point, the sensitivity, defined as the dependence of the output optical intensity on the sample variations, can be increased by about one order of magnitude compared to that of the SPR sensor alone under the intensity i

采用Z-型和岛式两种扫描策略，利用激光选区熔化（SLM）技术成形了具有不同悬垂角度的Ti6Al4V试件，研究了熔池行为与悬垂角度和成形质量之间的关系。结果表明，成形过程中，熔池面积先快速变大，达到峰值后，再随着成形高度的增加而缓慢减小。与面扫描相比，轮廓扫描时熔池明显不稳定，熔池面积振幅大。随着悬垂角度的减小，熔池面积变小，悬垂表面粗糙度变大。与Z-型扫描方式相比，岛式扫描策略下熔池面积较小，熔池更为不稳定，且悬垂表面粗糙度高。