该资料为压缩包，内有4个文件，包含“LAN_HUB”、“RTL8367N-CG-DataSheet-1.0 ”、“RTL8367N-VB vs. RTL8367N Pin Assignments Difference”以及“RTL8367N原理图”,资料都是网络论坛搜集的，原理图也打板验证过可行，因为RTL8367N这个款芯片是千兆傻瓜交换机芯片，所以基本硬件电路没问题，打板直接插上路由器和设备就可以ping通。

看了评分，修改积分。16口千兆交换机芯片BCM5396 Design Guidelines 设计指南，配合技术手册使用效果更佳，没有更多的资料了，收好不谢！

Single-Chip 16-Port SerDes Gigabit Switch 16-port 10/100/1000 Mbps integrated switch controller via 1.25G SerDes/SGMII/fiber • Embedded 256 KB on-chip packet buffer • One 10/100/1000 Mbps In-band Management Port (IMP) with GMII/RGMII/RvMII/MII interface for PHY-less connection to a CPU/management entity (for management purposes only) • Integrated address management • Supports up to 4K MAC addresses • Supports jumbo frames up to 9728 bytes. • Supports EEPROM for low-cost chip configuration • Integrated Motorola® SPI-compatible interface • Supports port mirroring • Port-based VLAN and 4K IEEE 802.1Q tag VLAN • Port-, DiffServ-, MAC-, and IEEE 802.1p-based QoS for four queues • Supports Spanning Tree, Rapid Spanning Tree, and Multiple Spanning Tree protocols (802.1D/1s/1w) • Supports IEEE Standard 802.1X port security • Supports pseudo-PHY MDIO access • MAC-based trunking with link fail-over • Ethernet-in-the-last-mile (EFM) support: OAM and P • Low-power (2.2W total) 1.2V core/2.5V (SGMII I/ O)/3.3V (GMII/MII/RvMII) and 2.5V RGMII operation with 3.3V I/O tolerance • 256-pin FBGA package

 RTL8370N-VB: Single-chip 8-port gigabit non-blocking switch architecture  Embedded 8-port 10/100/1000Base-T PHY  Each port supports full duplex 10/100/1000M connectivity (half duplex only supported in 10/100M mode)  Full-duplex and half-duplex operation with IEEE 802.3x flow control and backpressure  Supports 9216-byte jumbo packet length forwarding at wire speed  Supports Realtek Cable Test (RTCT) function  Supports 96-entry ACL Rules  Search keys support physical port, Layer2, Layer3, and Layer4 information  Actions support mirror, redirect, dropping, priority adjustment, traffic policing, CVLAN decision, and SVLAN assignment  Supports 5 types of user defined ACL rule format for 64 ACL rules  Optional per-port enable/disable of ACL function  Optional setting of per-port action to take when ACL mismatch  Supports IEEE 802.1Q VLAN  Supports 4K VLANs and 32 Extra Enhanced VLANs  Supports Un-tag definition in each VLAN  Supports VLAN policing and VLAN forwarding decision  Supports Port-based, Tag-based, and Protocol-based VLAN  Up to 4 Protocol-based VLAN entries  Supports per-port and per-VLAN egress VLAN tagging and un-tagging  Supports IVL, SVL, and IVL/SVL  Supports 4096-entry MAC address table with 4-way hash algorithm  Up to 4096 L2/L3 Filtering Database  Supports Spanning Tree port behavior configuration  IEEE 802.1w Rapid Spanning Tree  IEEE 802.1s Multiple Spanning Tree with up to 16 Spanning Tree instances  Supports IEEE 802.1x Access Control Protocol  Port-Based Access Control  MAC-Based Access Control  Guest VLAN  Supports Quality of Service (QoS)  Supports per port Input Bandwidth Control  Traffic classification based on IEEE 802.1p/Q priority definition, physical Port, IP DSCP field, ACL definition, VLAN based priority, MAC based priority, and SVLAN b