只适用华谊MS8236万用表，主控芯片DTM0660-DTA0660都可以用，里面有修改万用表显示、背光时间等等参数的说明，文件大小256字节，EEPROM型号24C02

TW9+Q3J11 附刷Bios工具 SW9神舟K480可识别旧版Bios TW9+Q3J11 附刷Bios工具 SW9神舟K480可识别旧版Bios

方正科技台式主机文祥E620主机板BIOS，更新的最后一版BIOS.

联想Y480的ROM文件，未加入slic，需要的来吧。

ROG-STRIX-RX580-O8G-GAMING原厂BIOS，完全纯洁需要的自行下载

This Unified Extensible Firmware Interface (hereafter known as UEFI) Specification describes an interface between the operating system (OS) and the platform firmware. UEFI was preceded by the Extensible Firmware Interface Specification 1.10 (EFI). As a result, some code and certain protocol names retain the EFI designation. Unless otherwise noted, EFI designations in this specification may be assumed to be part of UEFI. The interface is in the form of data tables that contain platform-related information, and boot and runtime service calls that are available to the OS loader and the OS. Together, these provide a standard environment for booting an OS. This specification is designed as a pure interface specification. As such, the specification defines the set of interfaces and structures that platform firmware must implement. Similarly, the specification defines the set of interfaces and structures that the OS may use in booting. How either the firmware developer chooses to implement the required elements or the OS developer chooses to make use of those interfaces and structures is an implementation decision left for the developer. The intent of this specification is to define a way for the OS and platform firmware to communicate only information necessary to support the OS boot process. This is accomplished through a formal and complete abstract specification of the software-visible interface presented to the OS by the platform and firmware. Using this formal definition, a shrink-wrap OS intended to run on platforms compatible with supported processor specifications will be able to boot on a variety of system designs without further platform or OS customization. The definition will also allow for platform innovation to introduce new features and functionality that enhance platform capability without requiring new code to be written in the OS boot sequence. Furthermore, an abstract specification opens a route to replace legacy devices and firmwa

前阵子买了块科浦特PCIE接口的NVME固态硬盘，1个T，花了1300多块大洋。兴冲冲装上主板后发现BIOS无法识别，郁闷了。。。 于是各种搜索姿势走起。。。 终于找到了大牛硬改BIOS支持NVME的方法，不敢独享。 原帖在这里：https://www.itsk.com/thread-403294-1-1.html 说的比较详细了，唯一美中不足的是未提供资源下载。找了好久才找齐，另外里面的MMTOOL也只是英文版的。不过并不影响使用，帖子中有图，照图中的位置点按钮就行了，不需要知道英文含义。 文中提到了三个东西，包里都有： 1. 华硕AI_SuiteIII软件，用于在windows系统下更新BIOS固件。在官网我只找到AI_SuiteII套件。我提供的包里面是III； 2. MMTOOL，用于向官方固件写入NVME驱动模块 3. NVME驱动模块：NVMEExpressDxe.ffs 另外还需要去官网下载原版固件，需要对应你的主板型号下载。官网链接： https://www.asus.com.cn/support/Download-Center/ 我在包里附带了我写好的固件包，和我主板型号相同的话就可以直接使用。我的主板是华硕B85-PLUS REV 1.01。具体版本号在主板上能看到。

Intel的A Tour beyond BIOS白皮书系列，这本主要讲UEFI下的memory map，对想要了解UEFI内存管理的有很大帮助。

G4810编程器固件 解决5B00 不能进维修模式 一刷即好

UEFI是Intel推出的新一代BIOS技术。在分析UEFI基本结构和驱动程序模型的基础上，详细论述了基于USB协议栈的CC2531 ZigBee模块的设备驱动程序设计与开发过程，实现了在操作系统启动之前主机与USB设备间的信息交互，扩展了UEFI的功能。