富士施乐 FUJI XEROX DocuPrint CM225fw/CM228fw最新固件200617_dpcm225_228fw_stdap.exe 更新打印机固件 方法 Update Printer Firmware / Procedure for Upgrading Firmware : ：固件在升级过程中，不要关闭打印机电源，也不要向打印机发送任何打印作业。升级过程中不能有任何中断，否则会造成打印机的损坏！ 固件可以使用以下两种方法进行更新： 1.网络更新固件 2.USB更新固件 请下载固件包”xxxxxx _dpcm225_228fw_stdap .exe”。x

ADM显卡刷BIOS工具刷入，刷显卡BIOS有风险，请谨慎。据说蓝宝石的BIOS所有品牌通刷 ADM显卡刷BIOS工具刷入，刷显卡BIOS有风险，请谨慎。据说蓝宝石的BIOS所有品牌通刷 ADM显卡刷BIOS工具刷入，刷显卡BIOS有风险，请谨慎。据说蓝宝石的BIOS所有品牌通刷 ADM显卡刷BIOS工具刷入，刷显卡BIOS有风险，请谨慎。据说蓝宝石的BIOS所有品牌通刷

联想G41主板BIOS 老主板福音90KT16AUS.ROM

This document discusses the requirements for standard software access to the NVIDIAÒ family of graphics display processors, which support resolutions, color depths, and frame buffer organizations beyond that of the IBM VGA standard. This guide is written for use by applications and system software programmers, and provides extended interfaces to support enhanced operations such as refresh rate support, monitor type detection, and power management. It serves as a complete reference for the NVIDIA VGA BIOS based on the Release 3 source code. Knowledge of 80x86 assembly language and the VGA hardware may be required to understand the contents of this document. The services in this document may be called from high level languages that provide an interface to the software interrupts of the 80x86 architecture. This document uses “BIOS” and “VGA BIOS” interchangeably to indicate the NVIDIA VGA BIOS.

1660S 海力士颗粒提算力BIOS

一个很好的CMOS学习工具，在windows下运行CMOS，可以大胆的做任何设置，这只是一个模拟程序，对系统没有任何影响.,现在学CMOS和BIOS可以到windows下学习了！！

解决联想启天M7150(G41主板)无法安装Win7、Win10等64位系统（停留在启动画面，无法进系统，如果以安全模式启动会卡在disk.sys驱动加载进度处），亲测启天M7150刷机后可正常安装Win7 64位，且能识别出４Ｇ内存,文件包中含有afuwin刷机工具原版、汉化版都有，非常简单，图形化、命令行均可支持。图形化工具直接打开内附的BIOS文件点击刷写，刷写完毕后重启并且关下机在开机就ＯＫ。

备份ami bios,刷bios工具，win7 win10 32位 64位都可以用。afuwin4.47 afuwin4.48 备份带ufi的bios出现死机的情况，必须用最新版本的afuwin，新版本已经改名AFUWINGUI3.07,这是官网下载的最新版本。 AFU (AMI Firmware Update) is a package of utilities used to update the system BIOS under various operating systems. Note: AFU only works for APTIO with SMI FLASH support. Compatible with Aptio 3, 4, and 4.5. The package includes: - AFUWINx64 3.09.03.1462 - AFUWINGUIx64 3.09.03.1462 - AFU User Guide To run, extract all of the files from the folder with the name corresponding to the desired operating system. Usage (applies to AFUWIN, AFUDOS, AFUEFI and AFUEFI64... for usage of AFUBSD and AFULNX see help files provided in their folders): ------------------------------------------------------------------ AFUEFI [Option 1] [Option 2] Or AFUEFI Or AFUEFI BIOS ROM File Name The mandatory field is used to specify path/filename of the BIOS ROM file with extension. Commands The mandatory field is used to select an operation mode. - /O Save current ROM image to file - /U Display ROM File's ROMID - /S Refer to Options: /S - /D Verification test of given ROM File without flashing BIOS. - /OAD Refer to Options: /OAD - /A Refer to Options: /A - /CLNEVNLOG Refer to Options: /CLNEVNLOG Options The optional field used to supply more information for flashing BIOS ROM. Following lists the supported optional parameters and format: - /CLRCFG Program without preserving setup configuration - /BCPALL Save all question values before flash - /DPC Don't Check Aptio 4 and Aptio 5 platform. - /MEUL: Program ME Entire Firmware Block, which supports Production.BIN and PreProduction.BIN files. - /Q Silent execution - /X Don't Check ROM ID - /CAF Compare ROM file's data with Systems is different or not, if not then cancel related update. - /S Display current system's ROMID - /JBC Don't Check AC adapter and battery - /HOLEOUT: Save specific ROM Hole according to RomHole GUID. NewRomHole1.BIN /HOLEOUT:GUID - /SP Preserve Setup setting. - /Rn Preserve SMBIOS type N during programming(n=0-255) - /R Preserve ALL SMBIOS structure during programming - /B Program Boot Block - /P Program Main BIOS - /K Program all non-critical blocks. - /N Program NVRAM - /Kn Program n'th non-critical block(n=0-15). - /HOLE: Update specific ROM Hole according to RomHole GUID. NewRomHole1.BIN /HOLE:GUID - /L Program all ROM Holes. - /Ln Program n'th ROM Hole only(n=0-15). - /E Program Embedded Controller Block. - /OAD Delete Oem Activation key - /A Oem Activation file - /E Program Embedded Controller Block - /ECUF Update EC BIOS when newer version is detected. - /ME Program ME Entire Firmware Block. - /MEUF Program ME Ignition Firmware Block. - /CLNEVNLOG Clear Event Log. - /CAPSULE Override Secure Flash policy to Capsule - /RECOVERY Override Secure Flash policy to Recovery - /EC Program Embedded Controller Block. (Flash Type) - /CMD: Send special command to BIOS. /CMD:{xxx, xxx, xxx} - /OEMCMD: Send special value to BIOS. /OEMCMD:xxx - /REBOOT Reboot after programming. - /SHUTDOWN Shutdown after programming. - /FDR Flash Flash-Descriptor Region.(*1) - /GBER Flash GBE Region.(*1) - /MER Flash Entire ME Region.(*1) - /OPR Flash Operation Region of SPS.(*1) - /PDR Flash PDR Region.(*1) (*1)If BIOS ME Module have report, AFU will be show this command. Rules - Any parameter encolsed by is a mandatory field. - Any parameter enclosed by [ ] is an optional field. - cannot co-exist with any [Options]. - Main BIOS image is default flashing area if no any option present. - [/REBOOT], [/X], and [/S] will enable [/P] function automatically. - If [/B] present alone, there is only the Boot Block area to be updated. - If [/N] present alone, there is only the NVRAM area to be updated. - If [/E] present alone, there is only the Embedded Controller bl

BurnInTest性能测试软件；GetGUID创建一个GUID；RW硬件信息读取工具；HE相比RW功能更齐全一些；spacesniffer读取磁盘信使用息方便删除不需要的文件；SScom串口通信工具打印log；Intel、CAM CPU信息读取等和任务管理器类似，Xshell串口重定向使用工具

富士康H81S B85S_BIOS,富士康H81S B85S_BIOS,富士康H81S B85S_BIOS,富士康H81S B85S_BIOS,