在BIOS v1.21中增加HotKey Mode （关闭后按【F1】就不用同时按 【FN】+【F1】了） 原文描述: Flash BIOS update - Flash from Operating System version for IdeaPad Z400/Z500/Z400 Touch/Z500 Touch/P400 Touch/P500/P500 Touch, Erazer Z400/Z400 Touch/Z500/Z500 Touch Version 71CN51WW(V1.21) Installation README Updated Date:2013-10-17 This package updates the basic input/output system (BIOS) on IdeaPad Z400/Z500/Z400 Touch/Z500 Touch/P400 Touch/P500/P500 Touch, Erazer Z400/Z400 Touch/Z500/Z500 Touch. BIOS, abbreviation of Basic Input／Output System, is integrated in ROM chip on main board, which contains the basic input/output program, system configuration information, system startup self-check and pre-setup programs. BIOS provides most basic low-level hardware operations; it is the connection between software and hardware, and interfacing window of hardware and operating system. Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS. Attention: Do not power off or restart your computer during the BIOS flashing process, which will cause serious damage and improper functioning of your computer. Print this file so that you can refer to it during the installation. Downloading the package ======================= 1. Click the file link to download the file from the web page. 2. When prompted, select a drive and directory in which to save the downloaded file. Installing the package in Windows. ====================== 1. Locate the file 71cn51ww.exe that has been downloaded. 2. Double click the 71cn51ww.exe icon. 3. Click install 4. Click flash bios 5. Press Enter to start flashing. During the process, you are advised not to turn off the computer. 6. When the update finishes, the computer will automatically reboot for the changes to take effect. 7. If the hot key not work without Fn key after flash BIOS, this SOP describes how to enable hot key mode Step 1: Press power button to boot, then press F2 k

黑客速成游戏HackTheGame 1.21汉化版，帮助你在学习中游戏，游戏中充实自己。

unity低模包，包含人物模型，捆绑骨骼动画，22幸存者角色 - 28僵尸角色 - 35车辆资产 - 119建立资产 - 67环境资产 - 48项资产 - 404支撑资产 - 75武器资产

google code上一个大牛写的Qt结合OpenCV多线程进行图像处理的例子。 捕获图像用一个线程，处理图像用一个线程，共享图像缓冲区。 我给加上了比较详细的中文注释。 注：opencv用的是2点几的版本。在pro文件中添加自己的配置才能运行

破解时间限制RunAsDate 1.21汉化绿色版，可以让软件永远在试用期内运行