请对照自己的系统选择使用
cdc-acm.ko ch341.ko cp210x.ko installCDCACM.sh installCH341.sh installCP210x.sh
These scripts expect a stock kernel, kernel version 4.4.38-tegra
More than likely, you will need to replug the USB device for it to be detected properly after installing the kernel module.
These scripts check the version magic of the module and compares it to the kernel version running on the machine. If the two do not match, the user is asked if they still want to continue the installation. If the two match, the module is installed.
Note that on a version mismatch, the user can still install the module. However, some extra steps may be needed after the installation to get the module installed fully. The steps are not covered here, but should be readily available elsewhere.
These scripts are for L4T 28.1. L4T version 28.2 includes cp210x and cdc-acm modules.
Release Notes
February, 2018
2021-08-17 22:01:13
306KB
1
CP210x USB to UART Bridge Controller适合win7 （64位）（32位）的cp210x usb转uart 驱动。
2021-08-13 13:53:35
1.92MB
1
Ubuntu:
1. make ( your cp210x driver )
2. cp cp210x.ko to /lib/modules//kernel/drivers/usb/serial
3. insmod /lib/modules/
2021-07-19 20:37:24
37KB
1
串口驱动，win10可以用，包括32位、64位
These devices include the CP2102N, CP2102, CP2103, CP2104, CP2105, CP2108, CP2109.
2021-07-08 17:03:50
6.52MB
1
AVR单片机 STK500驱动 CH341、CP210x_VCP_Win2K_XP
2021-07-06 10:24:01
1.72MB
1
linux系统下的cp210x系列驱动源码, 学习嵌入式ArmLinux设备驱动时，进行移植相关的学习;
2021-06-23 13:15:49
12KB
1
Ubuntu的下USB转串口芯片驱动程序安装CP210X，pl2303安装，适用于Linux，解决在Linux下找不到USB串口的问题
2021-05-02 19:11:30
1.72MB
1