可执行程序实现GIS系统功能，可以直接读取MIF文件。可用于读取MIF文件，将之显示为图形化界面。

嵌入式linux上使用QT4和mitab显示mapinfo或mif格式电子地图

可以直接将图片生成Mif文件，作为FPGA的ram或者rom的输入测试文件，也可以将txt文件转化成mif文件，很是方便

可以直接将图片生成Mif文件，作为FPGA的ram或者rom的输入测试文件，也可以将txt文件转化成mif文件，很是方便

常用于FPGA设计中正弦波的产生，配合相关EDA工具使用（如quartus），打开文件可生成正弦波.mif文件，内附教程。 （仅供个人学习交流之用）

一款非常强大的波形生成器，可以生成多种波形的mif

该文档详细给出了在QUARTUS II中生存MIF文档以初始化rom的方法

Bmp To Mif 转换器 // (karimov 2005) // This program was originnaly written by one of the ECE241 students to convert an image // supplied in a BMP file into an MIF file format for use with Quartus II. // // This program has recently been modified to work with the new VGA controller used with the DE2 // board. // // What to do: // 1. Create an image in Microsoft paint (or other program). The image must be 160 pixels wide, 120 pixels high and // use 24-bits to represent colour information. // 2. Once you create the image you need, flip it up-side down. Then save the BMP file. (example: foo.bmp) // 3. Run this converter in command prompt using the name of the BMP file you created as a command-line parameter. // For example: // bmp2mif foo.bmp // 4. The program generates two files: // image.colour.mif - an MIF file with 3 bits colour information obtained from the BMP file you supplied // image.mono.mif - an MIF file containing 1 bit of colour for every pixel on the screen. The dot will either be // black or white. // You can change the file names once they are created, but they should still have the .mif extension. // // 5. Copy the proper MIF file to the directory where your design is located and include it in your project. // 6. Change the BACKGROUND_IMAGE parameter of the VgaAdapter to indicate your MIF file. // 7. The COLOR_CHANNEL_DEPTH parameter must be set to 1 to work with the image.colour.mif file. #include #include #define FLIP_INT(c) ((c >> 24) & 0x000000FF) | ((c & 0x00FF0000) >> 8) | ((c & 0x0000FF00) << 8) | ((c & 0x000000FF) <> 8) | ((c & 0x00FF) << 8) typedef struct s_header { unsigned short bfType; unsigned int bfSize; unsigned short reserved1; unsigned short reserved2; unsigned int offset; } t_bmp_header; typedef struct s_bmp_info { unsigned int biSize; unsigned int biWidth; unsigned int biHeight; unsigned short biPlanes; unsigned short biBitCount; unsigned in

使用modelsim仿真FPGA的ROM，可以使用该matlab程序创建.mif文件，用来初始化FPGA中ROM的数据，可以根据自己的具体需要，修改波形函数。注意：.m文件在哪个目录下，mif文件就在那。

在qt上用maitab开发的mapinfo电子地图