JLinkARM.dll(V6.86)，MDK533版自带版本，已经解除“the connected j-link is defective”弹窗，可正常下载和仿真。直接覆盖原文件即可。
2021-02-19 13:06:05
15.87MB
1
JLinkARM.dll(V6.94b)，最新版Segger Jlink驱动，已经解除“the connected j-link is defective”弹窗，可正常下载和仿真。直接覆盖原文件即可。
2021-02-19 13:06:05
16.62MB
1
，当进行J-Link调试仿真发生JLinkARM.dll出错时，把这个文件内容覆盖Keil_v5\ARM\Segger目录就正常回来了
2021-02-05 17:06:08
8.1MB
1
完美解决去掉The connected J-Link is defective提示框和解决不能仿真的问题
2020-12-19 15:48:03
7.41MB
1
Any ARM7/ARM9, Cortex-M0/M1/M3/M4 and Renesas RX600 core supported
Microcontroller (internal flash) support.
Support for most external flash chips (For more information please refer to
Target systems on page 75).
High speed programming: up to 200 KBytes/sec* (depending on flash device).
Very high speed blank check: approximately 16 MBytes/sec (depending on the
chip).
Smart read back: only non-blank portions of flash are transferred and saved.
Free evaluation licenses available.
Verbose logging of all communication.
.hex, .mot, .srec, and .bin support.
Intuitive user interface.
仅用于学习用途，解释权归SEEGER所有
2020-01-03 11:19:45
13.01MB
1
利用ollydbg来修改高版本的JLinkARM.dll，使其能够在我们的低版本固件上使用，不在提示The connected J-Link is defective且仿真不中断
2019-12-21 22:10:25
26.6MB
1