单片机开发下载工具软件带驱动包。如数字杀毒软件报毒请把其添加到白名单中,如有顾虑请自行到官网下载。 更新内容及时间：Ver6.88L (2022-1-7) 1. 对"P3.2/P3.3必须同时为低电平才能下载"的选项增加用户确认 2. 修正"串口助手"界面显示错误 3. 仿真驱动程序版本更新为v1.16 (解决STC8A8K64D4系列无法正确仿真的问题)

STC-isp-15xx-v6.36 支持Win7,Win8.rar

DIY自制STC-ISP下载电路原理pdf ，里面有电路原理，照着原理就可做出属于自己的ISP系统咯！

stc-isp-15xx-v6.87E.zip

STC单片机ISP协议的编写详细说明！能通过这种方式实现远程升级！

STC单片机ISP下载程序，通过串口即可下载，很好用

/*---------------------------------------------------------------------*/ /* --- STC MCU Limited ------------------------------------------------*/ /* --- 使用主芯片对从芯片(限STC15系列)进行ISP下载举例 -----------------*/ /* --- Mobile: (86)13922805190 ----------------------------------------*/ /* --- Fax: 86-755-82905966 -------------------------------------------*/ /* --- Tel: 86-755-82948412 -------------------------------------------*/ /* --- Web: www.STCMCU.com --------------------------------------------*/ /* 如果要在程序中使用此代码,请在程序中注明使用了宏晶科技的资料及程序 */ /* 如果要在文章中应用此代码,请在文章中注明使用了宏晶科技的资料及程序 */ /*---------------------------------------------------------------------*/ //本示例在Keil开发环境下请选择Intel的8058芯片型号进行编译 //假定测试芯片的工作频率为11.0592MHz //注意:使用本代码对STC15系列的单片机进行下载时,必须要执行了Download代码之后, //才能给目标芯片上电,否则目标芯片将无法正确下载 #include "reg51.h" typedef bit BOOL; typedef unsigned char BYTE; typedef unsigned short WORD; typedef unsigned long DWORD; //宏、常量定义 #define FALSE 0 #define TRUE 1 #define LOBYTE(w) ((BYTE)(WORD)(w)) #define HIBYTE(w) ((BYTE)((WORD)(w) >> 8)) #define MINBAUD 2400L #define MAXBAUD 115200L #define FOSC 11059200L //主控芯片工作频率 #define BR(n) (65536 - FOSC/4/(n)) //主控芯片串口波特率计算公式 #define T1MS (65536 - FOSC/1000) //主控芯片1ms定时初值 #define FUSER 24000000L //15系列目标芯片工作频率 #define RL(n) (65536 - FUSER/4/(n)) //15系列目标芯片串口波特率计算公式 //SFR定义 sfr AUXR = 0x8e; //变量定义 BOOL f1ms; //1ms标志位 BOOL UartBusy; //串口发送忙标志位 BOOL UartReceived; //串口数据接收完成标志位 BYTE UartRecvStep; //串口数据接收控制 BYTE TimeOut; //串口通讯超时计数器 BYTE xdata TxBuffer[256]; //串口数据发送缓冲区 BYTE xdata RxBuffer[256]; //串口数据接收缓冲区 char code DEMO[256]; //演示代码数据 //函数声明 void Initial(void); void DelayXms(WORD x); BYTE UartSend(BYTE dat); void CommInit(void); void CommSend(BYTE size); BOOL Download(BYTE *pdat, long size); //主函数入口 void main(void) { while (1) { Initial(); if (Download(DEMO, 0x0100)) { //下载成功 P3 = 0xff; DelayXms(500); P3 = 0x00; DelayXms(500); P3 = 0xff; DelayXms(500); P3 = 0x00; DelayXms(500); P3 = 0xff; DelayXms(500); P3 = 0x00; DelayXms(500); P3 = 0xff; } else { //下载失败 P3 = 0xff; DelayXms(500); P3 = 0xf3; DelayXms(500); P3 = 0xff; DelayXms(500); P3 = 0xf3; DelayXms(500); P3 = 0xff; DelayXms(500); P3 = 0xf3; DelayXms(500); P3 = 0xff; } } } //1ms定时器中断服务程序 void tm0(void) interrupt 1 using 1 { static BYTE Counter100; f1ms = TRUE; if (Counter100-- == 0) { Counter100 = 100; if (TimeOut) TimeOut--; } } //串口中断服务程序 void uart(void) interrupt 4 using 1 { static WORD RecvSum; static BYTE RecvIndex; static BYTE RecvCount; BYTE dat; if (TI) { TI = 0; UartBusy = FALSE; } if (RI) { RI = 0; dat = SBUF; switch (UartRecvStep) { case 1: if (dat != 0xb9) goto L_CheckFirst; UartRecvStep++; break; case 2: if (dat != 0x68) goto L_CheckFirst; UartRecvStep++; break; case 3: if (dat != 0x00) goto L_CheckFirst; UartRecvStep++; break; case 4: RecvSum = 0x68 + dat; RecvCount = dat - 6; RecvIndex = 0; UartRecvStep++; break; case 5: RecvSum += dat; RxBuffer[RecvIndex++] = dat; if (RecvIndex == RecvCount) UartRecvStep++; break; case 6: if (dat != HIBYTE(RecvSum)) goto L_CheckFirst; UartRecvStep++; break; case 7: if (dat != LOBYTE(RecvSum)) goto L_CheckFirst; UartRecvStep++; break; case 8: if (dat != 0x16) goto L_CheckFirst; UartReceived = TRUE; UartRecvStep++; break; L_CheckFirst: case 0: default: CommInit(); UartRecvStep = (dat == 0x46 ? 1 : 0); break; } } } //系统初始化 void Initial(void) { UartBusy = FALSE; SCON = 0xd0; //串口数据模式必须为8位数据+1位偶检验 AUXR = 0xc0; TMOD = 0x00; TH0 = HIBYTE(T1MS); TL0 = LOBYTE(T1MS); TR0 = 1; TH1 = HIBYTE(BR(MINBAUD)); TL1 = LOBYTE(BR(MINBAUD)); TR1 = 1; ET0 = 1; ES = 1; EA = 1; } //Xms延时程序 void DelayXms(WORD x) { do { f1ms = FALSE; while (!f1ms); } while (x--); } //串口数据发送程序 BYTE UartSend(BYTE dat) { while (UartBusy); UartBusy = TRUE; ACC = dat; TB8 = P; SBUF = ACC; return dat; } //串口通讯初始化 void CommInit(void) { UartRecvStep = 0; TimeOut = 20; UartReceived = FALSE; } //发送串口通讯数据包 void CommSend(BYTE size) { WORD sum; BYTE i; UartSend(0x46); UartSend(0xb9); UartSend(0x6a); UartSend(0x00); sum = size + 6 + 0x6a; UartSend(size + 6); for (i=0; iSTC-ISP下载软件将从芯片的硬件选项设置好 //// 以后再使用主芯片对从芯片下载程序时不写硬件选项 //DelayXms(10); //for (cnt=0; cnt<128; cnt++) //{ // TxBuffer[cnt] = 0xff; //} //TxBuffer[0] = 0x04; //TxBuffer[1] = 0x00; //TxBuffer[2] = 0x00; //TxBuffer[34] = 0xfd; //TxBuffer[62] = arg; //TxBuffer[63] = 0x7f; //TxBuffer[64] = 0xf7; //TxBuffer[65] = 0x7b; //TxBuffer[66] = 0x1f; //CommSend(67); //while (1) //{ // if (TimeOut == 0) return FALSE; // if (UartReceived) // { // if ((RxBuffer[0] == 0x04) && (RxBuffer[1] == 'T')) break; // return FALSE; // } //} //下载完成 return TRUE; } char code DEMO[256] = { 0x02,0x00,0x5E,0x12,0x00,0x4B,0x75,0xB0, 0xEF,0x12,0x00,0x2C,0x75,0xB0,0xDF,0x12, 0x00,0x2C,0x75,0xB0,0xFE,0x12,0x00,0x2C, 0x75,0xB0,0xFD,0x12,0x00,0x2C,0x75,0xB0, 0xFB,0x12,0x00,0x2C,0x75,0xB0,0xF7,0x12, 0x00,0x2C,0x80,0xDA,0xE4,0xFF,0xFE,0xE4, 0xFD,0xFC,0x0D,0xBD,0x00,0x01,0x0C,0xBC, 0x01,0xF8,0xBD,0xF4,0xF5,0x0F,0xBF,0x00, 0x01,0x0E,0xBE,0x03,0xEA,0xBF,0xE8,0xE7, 0x02,0x00,0x4B,0x75,0x80,0xFF,0x75,0x90, 0xFF,0x75,0xA0,0xFF,0x75,0xB0,0xFF,0x75, 0xC0,0xFF,0x75,0xC8,0xFF,0x22,0x78,0x7F, 0xE4,0xF6,0xD8,0xFD,0x75,0x81,0x07,0x02, 0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, };

stc单片机应用，在线编译下载程序，STC单片机系列包括最新系列都可以应用。

stc-isp