利用隐含表作关联比较 AB→CF →EG →AB BD→CF →EG →AB√ CF →EG →AB√ EG →AB√ AD →AB√ 等效对: (A,B),(B,D),(A,D),(C,F),(E,G) 最大等效类： {A,B,D},{C,F},{E,G}， A B C D E F B C D E F G 利用隐含表寻找等效对 CF BF CG AB X BC CE X AF CG X EG X X AB X AF FG CF AC EF X X X AC CE X

西门子plc调试软件，功能强大。具体https://www.mhj-tools.com/winplc-analyzer/ 直接看网页。 先安装软件，然后用文件夹中的破解覆盖。本人亲自破解，只此一家。分数高了点。 With WinPLC-Analyzer you can record signals of a S7-PLC (S7-300, S7-400, S7-1200) or S5-PLC (Simatic S5 series). You can record signals like input, output, flags, data, timer and counter. If you want, you can define a Trigger with S7-STL code. Then you can use this trigger to control the recording or to create a user message. When using S7-300, S7-400 you can also record cyclic exact. This means, that a short program will be transfered into the PLC. This ensures that you see every single edge in the recording. Without modifying the PLC progam you can record "scan exact". That means you can define the sampling rate in ms. With the special recording type "Offline recording", you can record the data within the PLC (without the PC connected). The next day you can transfer the results to your WinPLC-Analyzer project. Additional to the normal trend data, you can define "Snapshots". A "Snapshot" is a range of additional data, that will be stored, if a trigger event is raised. WinPLC-Analyzer also stores the data of the "i-stack" in case of a unexpected "PLC-Stop". Then you can examine the reasons for the PLC-Stop even after days. All software driver are included in the licence of WinPLC-Analyzer. You don't have to pay for every single driver separatly. To access a PLC over TCP/IP you don't need any other software or driver. Only if you want to use a SIEMENS Interface, the driver of it must be installed on the PC.

DELL笔记本_1420_时序借鉴.pdf

论文研究-基于属性的时序多层次交叉因子综合评判模型及分析法.pdf,  指出了模糊多层综合评判模型的不足 ,提出了基于属性的有时序多层次交叉因子综合评判系统模型 ,并给出模型的分析方法 ,最后用仿真例子给出与其它分析方法的对比 .

硬件开发人员画时序图的好软件，FPGA、MCU等开发人员必备工具

要复制代码，放进头歌里，满分过！

stm32103f 摄像头SCCB接口时序资料

使用torch搭建LSTM实现对羽毛球动作的实时训练并预测，本文将其分为数据集制作、数据处理、模型搭建以及可视化几个步骤

时序数据库技术和架构演进.pdf

Visio画时序图组件，实用方法很简单，下载，解压，然后放到一个固定的位置，Visio默认的查找位置为“D:\用户目录\我的文档\我的形状” 然后打开Visio，选择更多形状，我的形状，一般就添加进来了，没有添加的话，点击“组织我的形状”，看看下面有没有vss格式的三个文件，如果有的话，关掉重开就有了。