kegg与go通路数据库介绍功能富集软件介绍

《计算机组成原理》课程实验讲义及报告：数据通路组成实验

PYDT-RouteSim 一点通路由模拟软件

存数(sw)指令的数据通路 M[ R[rs] + SignExt[imm16] ] ← R[rt] Example: sw rt, rs, imm16 32 ALUctr Clk busW RegWr 32 32 busA 32 busB 5 5 5 Rw Ra Rb 32 32-bit Registers Rs Rt Rt Rd RegDst Ext Mux Mux 32 16 imm16 ALUSrc ExtOp Mux MemtoReg Clk Data In WrEn 32 Adr Data Memory 32 MemWr ALU RegDst=x, RegWr=0, ALUctr=add, ExtOp=1, ALUSrc=1, MemWr=1, MemtoReg=x 0 1 0 1 加兰色部分。才能向存储器存数 0 1 op rs rt imm16 0 16 21 26 31 6 bits 16 bits 5 bits 5 bits And here is the datapath for the store instruction. The Register File, the ALU, and the Extender are the same as the datapath for the load instruction because the memory address has to be calculated the exact same way: (a) Put the register selected by Rs onto bus A and sign extend the 16 bit immediate field. (b) Then make the ALU (ALUctr) adds these two (busA and output of Extender) together. The new thing we added here is busB extension (DataIn). More specifically, in order to send the register selected by the Rt field (Rb of the register file) to data memory, we need to connect bus B to the data memory’s Data In bus. Finally, the store instruction is the first instruction we encountered that does not do any register write at the end. Therefore the control unit must make sure RegWr is zero for this instruction. +2 = 64 min. (Y:44)

静脉通路的建立.ppt

数据通路、指令周期流程图、RISC指令系...

985,211高校计算机组成原理课程设计的讲义，本节内容主要是介绍单周期数据通路。

唐山啤酒通路促销活动培训.zip

这是一个求解迷宫通路的实验报告，里面附有全部源程序和程序结果，希望可以给大家一点启发，谢谢！

利用javafx完成的走通路游戏，我们的课设，类似于走迷宫，带有动画时钟，可以判断输赢，里面包括完整的说明文档，需求分析，界面，详细设计等报告