SOME/IP传输协议的SD部分协议规范，由AUTOSAR发布的标准文档，同时还有SoAD部分的说明
2021-12-20 14:43:50
1.79MB
1
This document describes the usage of the TJA1100 Customer Evaluation Board. The
Board supports the evaluation of the TJA1100 with providing (MII) a 40-pins standard
header (including MII/SMI/control signals/power supplies. Details can be found in section
2.3.1) with 2,54mm pinning distance to a host controller board, the bus interface (MDI)
including a srew terminal (SMKDS) connector as well as needed components for the
power supply and operation. Further information is given in the following sections.
2021-12-15 16:06:19
1.24MB
1
The TJA1101B is a 100BASE-T1-compliant Ethernet PHY optimized for automotive use
cases such as gateways, IP camera links, radar modules, driver assistance systems and
back-bone networks. The device provides 100 Mbit/s transmit and receive capability over
a single unshielded twisted-pair cable, supporting a cable length of up to at least 15 m.
The TJA1101B has been designed for automotive robustness and ISO 26262, ASIL-A
compliance, while minimizing power consumption and system costs.
2021-12-15 16:06:18
1.09MB
1
This reference document describes the configuration, register structure and
mapping of the TJA1101A Ethernet PHY.
2021-12-15 16:06:18
222KB
1
The SJA1105P/Q/R/S is a 5-port automotive Ethernet switch supporting IEEE Audio
Video Bridging (AVB) and Time-Sensitive Networking (TSN) standards. Each of the
five ports can be individually configured to operate at 10/100/1000 Mbit/s. This feature
provides the flexibility to connect any Fast/Gigabit/optical PHY or MCU/MPU to any of
the ports. Examples of external PHYs are the TJA1100 and TJA1102 IEEE 100BASE-T1
PHYs from NXP Semiconductors
2021-12-15 16:06:17
805KB
1
NXP以太网PHY芯片常见电路调试问题讲解
如何让客户使用TJA110x的设备和PC连接进行调试
September 14, 2017 COMPANY CONFIDENTIAL 3.
Media converter就是把100Base-T1 这种单对双绞线的以太网信号转换成标准的100Base -TX以太网，这样可以通过传统的
RJ-45网口接标准网线来接到电脑上。 否则电脑无法直接对接100Base-T1这种双绞线来进行通信。
2021-12-15 09:22:20
537KB
1
车载以太网白皮书：汽车网络的演变
2021-11-12 14:03:35
717KB
1