一篇对于弱磁技术讲的很详细的论文，其中有原理分析，simulink仿真模型，还有部分硬件和软件的内容。

STM32 的电机控制库。功能强大，能提供： 无传感器BLDC控制 有霍尔传感器BLDC控制 有传感器PMSM控制 有传感器PMSM+光电编码器控制 交流感应电机ACIM开环控制

FOC主要是通过对电机电流的控制实现对电机转矩(电流)、速度、位置的控制。通常是电流作为最内环，速度是中间环，位置作为最外环。

STM32 FOC 源代码

该上位机支持FOC2.0 库参数配置，通过输入控制对象参数，可输出配置.h文件，简化无刷电机的开发，提高开发效率。

永磁同步电机矢量控制的simulink模型；模型包括电流环，速度环，电机模型，SVPWM等模块

STM32电机控制开发包完全版V5.5.1-5.Y.1，2021年5月3日更新。 STM32 Motor Control Software Development Kit (MCSDK) - FULL source code Main Changes Version 5.Y.1 of the Motor Control Software Development Kit (X-CUBE-MCDSK) is a bug fix release of version 5.Y.0. It fixes the following issues: Some Motor Control examples delivered with MCSDK 5.Y.0 would not configure DMA channels properly to work with the new Motor Control and thus with the Motor Pilot. Also, the baudrate of the UART port configured by examples is set to 1,8 Mbps, the same as ST Motor Pilot's default. ACIM motor based examples do not build on 5.Y.0. They build well on 5.Y.1. The descriptions of EVSPIN32F0x inverter boards delivered with the Workbench had wrong DC & AC voltage supply ranges. These have been corrected as follows: Inverter Wrong AC supply range Corrected AC supply range DC supply range EVSPIN32F02Q1S1, EVSPIN32F0251S1 20 - 120 Vac 15 - 120 Vac 20 - 170 Vdc EVSPIN32F06Q1S1, EVSPIN32F0601S1 50 - 280 Vac 35 - 280 Vac 50 - 400 Vdc EVSPIN32F06Q2S1, EVSPIN32F0602S1 50 - 280 Vac 35 - 280 Vac 50 - 400 Vdc EVSPIN32F06Q1S3, EVSPIN32F0601S3 50 - 280 Vac 35 - 280 Vac 50 - 400 Vdc Six-Step High Voltage examples based on the EVSPIN32F0251S1 inverter board were mistakenly not included into 5.Y.0 version. They are in 5.Y.1. The Pilot would fail to update registers values from the embedded application in some situations. In such a case, information like the motor rotation speed, status and error information would not display. Fixed issues with the DAC output feature. Added many signals to the Datalog and the DAC output features. Among them, the observers, encoder and Hall sensors angles. Running the motor in the negative direction on STM32F0 based designs with 1 shunt and Hall sensor configuration may trigger an overcurrent error. Fixed an issue found on ESC G4 and F3 inverter boards with Motor Control Protocol v2. Contents Components Version License Terms Release Note Utilities/PC_Software/STMotorProfiler 1.3.2

TMS320F28069F，TMS320F28068F，TMS320F2 8062F InstaSPIN™-FOC 软件（中文版本）

本文档制作关于电动自行车控制器，并详细说明了如何编写FOC算法

程序采用凌欧平台，无感FOC控制方式，驱动的高速吸尘器电机控制程序。