w25q128fv中文版 Winbond 华邦 FLASH
2021-10-21 16:56:58 12.86MB w25q128
1
华邦w25x16 SPIFlash Read ID FPGA(EP4CE6)实验Verilog逻辑源码Quartus工程文件+文档说明资料,FPGA为CYCLONE4系列中的EP4CE6E22C8. 完整的工程文件,可以做为你的学习设计参考。 **------------------------------------------------------------------------------------------------------ ** Modified by: ** Modified date: ** Version: ** Descriptions: Read the Device ID of the W25X16 Flash ** **------------------------------------------------------------------------------------------------------ ********************************************************************************************************/ module W25X16 ( //input signal input sys_clk , input sys_rst_n , input W25X16_DO , //output signal output reg W25X16_CS , output reg W25X16_CLK , output reg W25X16_DIO , output reg [7:0] LED ); //reg define reg [5:0] counter ; reg [5:0] clk_cnt ; reg [15:0] shift_buf ; //wire define wire div_clk1 ; wire div_clk2 ; /******************************************************************************************************* ** Main Program ** ********************************************************************************************************/ //creat a clock about 1MHz always @(posedge sys_clk or negedge sys_rst_n) begin if ( sys_rst_n ==1'b0 ) clk_cnt <= 6'b0; else clk_cnt <= clk_cnt + 1'b1; end assign div_clk1 = clk_cnt[5]; assign div_clk2 = ~clk_cnt[5]; //get a counter that width is 6 bits always @(posedge div_clk1 or negedge sys_rst_n) begin if ( sys_rst_n ==1'b0 ) counter <= 6'b0; else counter = 8 && counter <= 58 ) W25X16_CS <= 1'b0;
STM32读写 W25X20 W25X10 ,硬件SPI;stm32;电子开发
2021-08-09 13:08:15 5KB stm32 spiflash 华邦
1
8051ISPwriter,华邦ISP软件,最新的华邦ISP软件,有LD引导程序
2021-08-08 18:50:51 2.14MB 8051ISPwriter 华邦ISP软件
1
20210709-并购优塾-兆易创新VS旺宏VS华邦电子:2021年7月跟踪,存储芯片产业链深度梳理.pdf
2021-07-20 09:05:37 1.85MB 行业
华邦W25系列SPI FLASH读写C语语言动源码(单片机),已在STM32单片机调试测试,可以做为你的学习设计参考。 ain.c文件: #include "stm32f10x_it.h" #include"hw_conf.h" #include "spi_flash.h" void delay(int d); u8 DataByte=0; u8 Tx_Buffer[] = {0x72,0x62,0x02,0x78,0x60,0x96,0x86,0x79,0x85,0x24,0x36,0x48}; u8 Rx_Buffer[BufferSize]; vu32 FLASH_ID = 0; int main(void) { #ifdef DEBUG debug(); #endif Setup_System(); SPI_FLASH_Init(); //SPI_FLASH_ByteWrite(0x72, 0x01F01F); //DataByte = SPI_FLASH_ByteRead(0x01F01F); //DataByte = SPI_Flash_ReadStatusRegister(); //SPI_FLASH_SectorErase(0x01F01F); //SPI_FLASH_BulkErase(0x01F01F); //SPI_FLASH_ChipErase(); //DataByte = SPI_FLASH_FasttRead(0x01F01F); //DataByte = SPI_Flash_ReadStatusRegister(); //DataByte = SPI_FLASH_ReadDeviceID(); //SPI_FLASH_ReadManuID_DeviceID(0x000000); //SPI_FLASH_ReadJedecID(); SPI_FLASH_PageWrite(Tx_Buffer, 0x01F01F, 10); SPI_FLASH_BufferRead(Rx_Buffer, 0x01F01F, 4); while (1) { if(Rx_Buffer[0]==0x72) { GPIO_WriteBit(GPIOC,GPIO_Pin_6,(BitAction)(1-GPIO_ReadOutputDataBit(GPIOC,GPIO_Pin_6))); delay(100); } if(Rx_Buffer[1]==0x62) { GPIO_WriteBit(GPIOC,GPIO_Pin_7,(BitAction)(1-GPIO_ReadOutputDataBit(GPIOC,GPIO_Pin_7))); delay(100); } if(Rx_Buffer[2]==0x02) { GPIO_WriteBit(GPIOC,GPIO_Pin_4,(BitAction)(1-GPIO_ReadOutputDataBit(GPIOC,GPIO_Pin_4))); delay(100); } if(Rx_Buffer[3]==0x78) { GPIO_WriteBit(GPIOC,GPIO_Pin_5,(BitAction)(1-GPIO_ReadOutputDataBit(GPIOC,GPIO_Pin_5))); delay(100); } } }
华邦ARM7编程指南。比较详细。中文的,包括所有寄存器的设置。
2021-05-16 08:19:08 4.24MB ARM 华邦 编程
1
51单片机 华邦 W78E516B规格书-中文版
1
华邦NAND FLASH 128M容量驱动 STM32407单片机驱动 参考三星128M NAND FLASH
2021-03-02 16:36:03 3.34MB 单片机
1
华邦SPInand W25M02G 驱动,采用硬件SPI控制,MCU采用S32K144
2021-03-02 16:30:50 6KB 华邦nandspi驱动
1