图片扫描版 ANSI C63.4-2014 (Revision of ANSI C63.4-2009) American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltag Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz

ANSI SQL 标准 想做ORM吗？比看的东西!

ANSI E1.11 - 2008 (R2018) is a reaffirmation of the 2008 edition. ANSI E1.11 describes a method of digital data transmission for control of lighting equipment and accessories, including dimmers, color-changers, and related equipment. It intended to provide for interoperability at communication and mechanical levels with controllers and controlled equipment made by different manufacturers. It is an update and expansion of the protocol developed by the United States Institute for Theatre Technology, Inc. and published as "DMX512/1990, Digital Data Transmission Standards for Dimmers and Controllers."

Qt创建多个ini配置文件，包括序列化和反序列化操作，支持UTF-8和ANSI，功能强大。

完整英文电子版ANSI C63.5-2017 American National Standard for Electromagnetic Compatibility— Radiated Emission Measurements in Electromagnetic Interference (EMI) Control—Calibration and Qualification of Antennas (9 kHz to 40 GHz) -电磁兼容性-电磁干扰（EMI）控制中的辐射发射测量-天线的校准和鉴定（9 kHz至40 GHz）。 本标准提供了确定天线系数（AFs）和天线相关参数的方法，这些天线用于在9 kHz至40 GHz的电磁干扰（EMI）控制中执行辐射发射测量。 本标准涵盖的天线是线性极化天线，例如环路，杆（单极），调谐偶极子，双圆锥偶极子，对数周期偶极子阵列，混合天线（即，宽带偶极子和对数周期偶极子阵列天线），宽带号角， 等等，用于各种ASCC63®排放测量标准（例如ANSI C63.4和ANSI C63.10）定义的测量中。

----也就是/usr/lib目录下比较常见的libc.a, 如果我们想直到printf之类的c库函数的实现细节，可以查它

RDM协议 远程管理协议 纯英文

完整英文电子版ANSI/ESDA/JEDEC JS-002-2018 For Electrostatic Discharge Sensitivity Testing - Charged Device Model (CDM) - Device Level (用于静电放电敏感度测试 - 带电设备模型（CDM） - 设备级别 )。 本文档的目的（目标）是建立一种测试方法，该方法将复制CDM故障并在测试仪之间提供可靠，可重复的CDM ESD测试结果，而与设备类型无关。 可重复的数据将允许对CDM ESD敏感度等级进行准确的分类和比较。

ANSI E1.20 - 2010, Entertainment Technology-RDM-Remote Device Management over USITT DMX512 Networks, describes a method of bi-directional communications over a USITT DMX512/1990 or ANSI E1.11 - 2004 data link between an entertainment lighting controller and one or more remotely controlled lighting devices. The protocol was written to work with the ANSI E1.11-2004 control standard, but will work equally well with the current 2009 version of E1.11. It allows discovery of devices on a DMX512/E1.11 network and the remote setting of DMX starting addresses, as well as status and fault reporting back to the control console. The 2010 edition corrects errors in the 2006 edition, and adds a new message to say that a previously reported problem has been cleared. The 2010 edition is bookmarked for easier use. The download includes ANSI E1.37-1 and E1.37-2 because they are particularly useful with E1.20.

ANSI+C标准详解 汉语 影印本