xs128 ccd的采集程序，里面含有程序源代码

一款线性CCD调试神器，清晰查看CCD采集效果

为了实现对加热炉温度的采集与测量，有效控制炉内物料或工件的加热过程，采用CCD图像传感器结合PC机监控炉内温度。根据比色测温原理，通过MATLAB编程实现像点与温度对应的算法关系，计算出采集得到的图片中各点的温度值及区域的场温度值，由于所得的温度值与实际温度值有较大偏差，编程实现了对温度的校正。实验结果显示，测得的温度与实际温度的绝对误差基本小于10℃，相对误差小于1％，表明系统具有在线实时、精度高、可靠性好等优点。

该代码能实现STM３２驱动CCD采集灰度值，并通过串口助手查看灰度值，　　　　　　或通过上位机查看CCD采集灰度信息。

三菱PLC FX5U标准伺服定位程序 FX5U 12轴程序案例例子 5U10轴CCLINK_CCD大型程序 两台FXX5U和1台威纶触摸屏加交换机以太网通讯

本压缩包中包含了蓝宙电子关于TSL1401线性ccd的全部资料，包括时序和数据采集源代码、调试文档、数据手册中文版，硬件电路设计等等。

A 9216 x 9216 active element solid state Charge Coupled Device (CCD) Full Frame sensor. The CCD is intended for advanced scientific, space, and aerial reconnaissance applications. The CCD 595 is organized as an array of 9216 horizontal by 9216 vertical imaging elements. The pixel pitch is 8.75um with a 100% fill factor. Three-phase clocking is employed in the imaging area with two-phase clocking in the serial readout registers. Image readout is performed via 4 serial registers containing 19 isolation rows between imaging and readout sections. The imaging array can be clocked unidirectional (4-output configuration) or bidirectional (8-output configuration). The imaging area segments are split in mid-array for the latter configuration. To maximize the exposure/readout cycle rate, concurrent array and serial register clocking is utilized. Fast transfer clocking between the array and serial registers is accomplished with strapped transfer gates that load each line in less than five microseconds.

60mm方形CCD，不是CMOS喔。 a 4096(H) x 4096(V) solid state Charge Coupled Device (CCD) Full Frame sensor. The CCD is intended for advanced scientific, space, industrial, and commercial digital imaging applications. The CCD6161 active area is organized as an array of 4096 horizontal by 4096 vertical imaging elements. In addition to 4096(H) x 4096(V) imaging elements there are 8 peripheral columns on left and right edges of the imaging area to improve non-uniformity at t h e edges. These 16 peripheral columns are not connected to t h e serial register. There are 32 isolation rows on top and bottom of the imaging area and these 64 isolation rows are covered by metal, making the total array 4112(H) x 4160(V). The pixel pitch is 15µm with a 100% fill factor. For dark reference, each readout line is preceded by 18 dark pixels. A split readout architecture has been adopted to facilitate high data rates with simultaneous readout from four output ports, and provides the flexibility to read out the entire image frame from two output ports, or from a single output port to simplify the drive electronics requirements.

s a 4096(H) x 4097(V) solid state Charge Coupled Device (CCD) full frame sensor. The CCD is intended for advanced scientific, space, industrial, and commercial digital imaging applications. The CCD486 active area is organized as an array of 4096 horizontal by 4097 vertical imaging elements. The pixel pitch is 15µm with a 100% fill factor. For dark reference, each readout line is preceded by 18 dark pixels. The imager is available in front-illuminated as well as back-illuminated configuration. A split readout architecture has been adopted to facilitate high data rates with simultaneous readout from four output ports, and provides the flexibility to read out the entire image frame from two output ports, or from a single output port to simplify the drive electronics requirements

著 者：王庆友， 出版社：天津大学出版社， 出版年：2000年