上海贝尔AP MSA1A-3113NA openwrt固件，可直接用原厂art，双频使用没问题

使用doxygen生成的scp-firmware的网页，其中包含有各个结构体关系图以及函数调用流程图。比网上其他地方更加详细

Realtek 以太网、wifi 和蓝牙适配器的二进制固件驱动程序 kali安装出现 缺失的固件文件是：rtlwifi/rtl8723befw_36.bin rtlwifi/rtl8723befw.bin 时，可将它复制到安装盘的的firmware目录里

Embedded Systems Firmware Demystified 嵌入式开发初学者很好的起步教材 写自己的操作系统

由GD32F450i USB DEVICE CDC_ACM修改过来，标准库非HAL库 适用于GD32F407 本案例用PB14,PB15做USB的D+ D-口

Intel CSME 12.0 Firmware Repository r22 ,bios ME合成固件。

Fortiwifi 60C 固件 V5.5.5 注意：这个是带WIFI版本的。 FWF-60C。 不适用于FGT-60C

This document describes the embedded firmware found in all derivatives of the FXTH87xx11 and FXTH87xx12 devices. The intended audience for this document is firmware architects, developers, coders and/ or testers working with the FXTH87xx11 and FXTH87xx12 devices. This document is divided into three sections: This introduction, a section describing global variables and standard formats used throughout the functions, and a third section describing each function.

Freescale’s FXTH87xx consist of complex system-on-chip products that contain a pressure sensor, a Radio Frequency (RF) transmitter, a Low Frequency (LF) receiver, an 8-bit S08 microcontroller (MCU), and may contain one or two axis accelerometers, all in one package. As with most S08 solutions, users must program the MCU with their program, but Freescale already ships low-level drivers, as well as compensation routines, within each part. In order to exploit these routines, the developer must be familiar not only with the MCU architecture, but also with the in-flash firmware. The aim of this document is to fast-track the learning curve of the latter part for someone that is already cognizant of the former.

该固件库是一个固件函数包，它由程序、数据结构和宏组成，包括了GD32 F3x0所有外设的性能特征。该固件库还包括每一个外设的驱动描述和基于评估板的固件库使用例程。通过使用本固件库，用户无需深入掌握细节，也可以轻松应用每一个外设。使用本固件库可以大大减少用户的编程时间，从而降低开发成本。