Advanced-Bash-Scripting-Guide-in-Chinese 《高级Bash脚本编程指南》revision 10 中文第10版

VITA 48.2 defines a detailed mechanical implementation for conduction cooling applications applied to PCBs/plug-in units defined in VITA 46. This standard gives the dimensions of associated plug-in units together with applicable detail dimensions of key sub-rack interfaces.

Release that incorporates errata against Revision 3.2: a) ECN073 - CIC Clarification; b) ECN074 - SATA Express Pin Sequencing; c) ECN075 - Identify Device data log and Word correction; d) ECN076 - Flow control; e) ECN077 - Automatic Partial to Slumber No NCQ; f) ECN078 - Queued Error I-bit Correction; g) ECN079 - TPR056 Corrections for Power Disable; h) ECN080 - NCQ Feature Set Clarification; i) ECN081 - Missing bit in ID data log for Rebuild Assist; j) ECN082 - FCOMP D24.2 Correction; k) ECN083 - Tx impedance balance cleanup; l) ECN084 - Slimline Figure Move; m) ECN085 - mSATA Figure Cleanup; n) ECN086 - Clarifying NCQ Commands; o) ECN087 - Missing bit in ID data log for Hybrid Information Enable; p) ECN088 - Enclosure services signature; and q) ECN089 - DSS/DAS Support Clarifications, and the following new features and enhancements: a) TPR056 - Enable new Power Disable feature on standard SATA connector P3; b) TPR057 - Register Signature definition for Host Managed Zoned devices; c) TPR058 - DAS/DSS/DHU Changes; d) TPR059 - Emphasis Control for SATA Interface; e) TPR060 - Modify/Cleanup Receive FPDMA Queued to support ZAC; f) TPR061 - Define/Use Sequential NCQ command(s); g) TPR062 - SEND/RECEIVE FPDMA Queued Cleanup; h) TPR063 - Align Queued DATA SET MANAGEMENT with ACS-4; i) TPR064 - Queued version of ACS-4 ZERO EXT command; j) TPR065 - Modernize Aux Field in NCQ NON-DATA Command; k) TPR066 - Reporting Current Write Pointer for NCQ Errors in Write Pointer Zones; l) TPR067 - FPDMA Zone Management Commands; m) TPR068 - Clarification of the FPDMA state machine and error reporting; n) TPR069 - MFTP Measurement Method for Emphasis; o) TPR070 - Retire ICC Field in SEND / RECEIVE FPDMA QUEUED; p) TPR071 - Addition of ZAC Management In/Out to NCQ Non-Data log (12h) and NCQ Send and Receive log (13h); q) TPR072 - Add Deferred Errors to NCQ Error log; r) TPR073 - IDENTIFY DEVICE Revision Updates; s) TPR074 - Obsolete Parallel ATA Emulation; and t) TPR075 - Add DATA SET MA

This specification describes the PCI Express® architecture, interconnect attributes, fabric management, and the programming interface required to design and build systems and peripherals that are compliant with the PCI Express Specification

PCI Express M.2 specification-Revision 0.7, Version 1.0,November 27, 2012, The M.2M.2 form factor is used for Mobile Add-In cards. The M.2 is a natural transition from the Mini Card and Half-Mini Card to a smaller form factor in both size and volume. The M.2 is a family of form factors that will enable expansion, contraction, and higher integration of functions onto a single form factor module solution. The key target for M.2 is to be significantly smaller in the XYZ and overall volume of the Half-Mini Card used today in mobile platforms in preparation for the very thin computing platforms (for example; Notebook, Tablet/Slate platforms) that require a much smaller solution.

两个月前从picmg官方网站上下的，最近再去，找不到免费的了，开始收费了。希望对想学习或研究的兄弟姐妹们有所帮助。 PICMG 3.0 Revision 3.0 AdvancedTCA Base Specification February 19, 2008 先进电信运算架构（ATCA）又被称为PICMG3.X，是用于满足高吞吐量、高可靠性的新一代计算机平台标准，该标准将为电信行业制定全新的刀片式产品和机箱外形技术提供规范。目前，ATCA正由PCI工业计算机制造商协会（PICMG）进行开发，协会致力于满足CompactPC（PICMG2.16）I及其他专有解决方案都不能满足的新一代通信应用中所提出的需要。

Serial ATA Revision 3.0 SATA 3.0 spec

把压缩包里的文件覆盖到mod的根目录即可，可以实现很多意外的功能，防止发生意外，用户可以先保存好自己原版的数据，以备自己想恢复的情况，如果有问题也请大家给建议和提出来。主要是script,conversation,trigger文件的改动，可以尝试只复制这个三个文件。

PCI Express Card Electromechanical Specification Revision 3.0； PCIE CEM 3.0标准； PCI Express Add-In Card、Mother Board标准规范。

PCI Express® Card Electromechanical Specification Revision 3.0