X9DAI 主板NVME BIOS文件 基于官方最新3.3版（8.712）添加nvme模块 ================================================ Standard BIOS Update Procedure ================================================ 1. Save this BIOS update package to your computer. 2. Extract the files to a DOS bootable device (such as a bootable USB stick, or a CD). 3. Boot to a DOS prompt and type AMI.BAT BIOSname.### to start the BIOS update. 4. Do not interrupt the process until the BIOS update is complete. 5. After the message indicating BIOS update has completed, unplug the AC, clear the CMOS, and then plug in the AC, power on the system. 6. Go to the BIOS configuration, load the default setting, save and exit the BIOS. ================================================ BIOS Recovery (see user's manual for details) ================================================ Recovery BIOS with a USB Drive If the BIOS file is corrupted and the system is not able to boot up, this feature will allow you to recover the BIOS image using a USB-attached device. A USB flash drive or a USB CD/DVD ROM drive may be used for this purpose. Please note that the USB hard disk drive is NOT supported at this moment. Follow the procedure below to recover the BIOS. 1. Use a different system, copy the standard BIOS binary image file into a USB flash drive or a writable CD/DVD disc's Root Directory, and rename the file to 揝UPER.ROM? 2. While the system is turned off, insert the USB device that contains the new BIOS binary image (揝UPER.ROM?. 3. Right after powering on the system, press and hold and keys together until the USB device's LED indicator comes on. This may take a few seconds or up to one minute to start the process. 4. Once the USB device's LED is on, release the and keys. The system may generate beep codes to indicate that the BIOS ROM firmware is being reprogrammed, and a message may also be displayed on the screen. DO NOT INTERRUPT THIS PROCESS UNTIL IT扴 FINISHED! 5. After the Boot Sector Recovery Process is complete, the system will reboot automatically. 6. Boot into USB drive again. When DOS prompt appear, please type AMI.BAT BIOSname.### to start BIOS update, just like in standard procedure. 7. Do not interrupt the process until the BIOS update is complete. 8. After you see the message of BIOS has completed the update, unplug the AC, clear the CMOS, and then plug in the AC, power on the system. Go to the BIOS configuration, load the default setting, save and exit the BIOS. Notes: * If the BIOS flash failed, you may contact our RMA Dept. to have the BIOS chip reprogrammed. This will require shipping the board to our RMA dept. for repair. Please submit your RMA request at http://www.supermicro.com/support/rma/. ********* BIOS Naming Convention ********** BIOS name : PPPPPSSY.MDD PPPPP : 5-Bytes for project name SS : 2-Bytes supplement for PPPPP Y : Year, 9 -> 2009, 0-> 2010, 1->2011 MDD : Month / Date E.g. BIOS with the build date: 2010/1/15: X8ST3-F -> X8ST30.115 X8SIL-F -> X8SIL0.115

技嘉GA-Z77P-D3主板最新Bios F9E，在官方F9E基础上增加了Nvme.ffs，NvmeInt13.ffs,NvmeSmm.ffs模块，自用完美支持UEFI ，NVME和M.2，同时对其他模块进行了优化升级，自用十分稳定反应快速没有发现任何问题，可放心更新。借助于技嘉的双Bios恢复技术，刷新bios其实并没有什么风险。

模块极小，只有6K大小！将模块添加至老主板的BIOS文件中，只要是支持EFI的老主板也可支持NVMe固态硬盘，解决了B85及类似主板或者BIOS空间有限不能使用NVMe固态硬盘的问题！

信步H81主板支持NVME格式固态硬盘 BIOS升级文件

方正文祥E560 MS7928 FM2+ 接口（请一定看清楚配置）去保护卡并加上NVME硬盘引导驱动

技嘉GA-970A-DS3P rev.1.0主板bios设置【增加nvme驱动】 技嘉GA-970A-DS3P rev.1.0主板增加nvme驱动bios,基于官方最新版bios修改。 开机进BIOS，用U盘直接刷入就可以了。 技嘉GA-970A-DS3P rev.1.0主板bios设置【增加nvme驱动】

本人利用网上学到的知识，提高老主板的运行速度，在根据官网下载的最新版本 f8e 的基础上，在bios内加入nvme引导引导模块，使得老主板通过转接卡 使用m2固态硬盘引导系统，提高系统运行速度。

升级BIOS，使原不支持Nvme启动的主板支持Nvme启动，解决旧电脑无法使用Nvme固态硬盘的问题

asus p8z77-v lx 主板的bios文件，已经添加好nvme，更新bios文件后可以支持从nvme m.2硬盘启动系统，速度起飞，亲测真实有效，如有问题可私信留言，内附操作说明。

bios文件名後綴改為: rom 后就可以正常讀取數據. 不會有aptio V 報錯.