文档全称：ASAM_XCP_MCD-1(ASAP1)_Universal Measurement and Calibration Protocol_V1.3_20150501,介绍： 1、XCP功能和概念（测量，标定，旁路，刷写，时间戳）; 2、XCP协议层; 3、与ASAM MCD-2 MC描述文件的接口; 4、与外部种子和密钥功能的接口; 5、与外部校验和功能的接口; 6、与外部A2L解压缩/解密功能的接口.

NUC970 USB Eye Diagarm Measurement Report

本文提出了一种在组织病理学图像中自动进行形态学描绘和细胞核分析的新方法。 结合初始分割信息和凹度测量，该方法首先将核簇分割为单个片段，避免了由比例约束的拉普拉斯高斯滤波引入的分割误差。 之后，引入核边界-标记证据计算，以在精细分割过程之后描绘单个对象。 然后，通过具有最小描述长度原理的周期性B样条对获得的证据集进行建模，从而在核结构的复杂性与其荧光信号的覆盖范围之间实现了实用的折衷，以避免拟合结果和拟合结果过拟合。 该算法计算效率高，并且已经在合成数据库以及45个真实的组织病理学图像上进行了测试。 通过将提出的方法与几种最先进的方法进行比较，实验结果表明了我们方法的优越识别性能，并指出了分析核形态内在特征的潜在应用。

通过使用测量引起的干扰（S Luo 2008 Phys。Rev. A 77 022301），我们提出了一种用于真正的多部分量子相关性的量化器。 建立了这种量子相关性度量与纯三位态多端口密集编码中的量子优势之间的联系。 它还用于研究四部分系统中的量子相关动力学。 发现了在某些时间窗内产生量子相关性和保持量子相关性的现象。 作为副产品，基于测量引起的干扰的一夫一妻制得分与纯三位态的广义几何测量有关。

An efficient and inexpensive method that uses a glass plate mounted onto a motorized rotating stage as a beam-steering device for the generation of dynamic optical traps is reported. Force analysis reveals that there are drag and trapping forces imposed on the bead in the opposite directions, respectively, in a viscous medium. The trapped bead will be rotated following the beam’s motion before it reaches the critical escape velocity when the drag force is equal to the optical trapping force. The

NI Measurement Studio 2015,NI设备在.NET平台下的开发必须工具,C# VB.net等开发NI采集卡的程序.资源较大,下载链接放在文本里.

Space Technology Experiment and Climate Exploration (STECE) is a small satellite mission of China for space technology experiment and climate exploration. A new test star tracker and.one ASTRO 10 star tracker have been loaded on the STECE satellite to test the new star tracker’s.measurement performance. However, there is no autonomous precession–nutation correction function for the test star tracker, which causes an apparent periodic deflection in the inter-boresight.angle between the two star t

国外经典的关于网络测量的书籍，在sprint骨干网上做过实验

The feasibility of measuring crater geometries by use of optical coherence tomography (OCT) is examined. Bovine shank bone on a motorized translation stage with a motion velocity of 3 mm/s is ablated with a pulsed CO2 laser in vitro. The laser pulse repetition rate is 60 Hz and the spot size on the tissue surface is 0.5 mm. Crater geometries are evaluated immediately by both OCT and histology methods after laser irradiation. The results reveal that OCT is capable of measuring crater geometries r

The objective of this study is to demonstrate that tensile stress resulting due to applied force on cornea can be accurately measured by using a time-domain common-path optical coherence tomography (OCT) system with an external contact reference. The unique design of the common-path OCT is utilized